FORD TRANSIT Mk6 2.0L TD 74kW/99HP WP.41/4

Calculateur DELPHI DCM3.1 · 101 CV (74 kW) · 2000 cc · Diesel sovralimentato

Base de données calculateursFORD › FORD TRANSIT Mk6 2.0L TD 74kW/99HP WP.41/4

Retrouvez les identifiants du firmware (numéros hardware, software et mise à jour), les options de tuning disponibles et comment obtenir le fichier d'origine ou reprogrammé.

✓ Tuning par fichier (flash) ✓ Module additionnel disponible 16 versions firmware

Données véhicule

MarqueFORD
ModèleTRANSIT Mk6
Moteur2.0L TD 74kW/99HP WP.41/4
Puissance d'origine101 CV / 74 kW
Cylindrée2000 cc
CarburantDiesel sovralimentato
Type de véhiculeLCV

Calculateur

FabricantDELPHI
ModèleDCM3.1
Mémoire / EPROM28F200 PSOP44 2Mbit - Flash 128K x16 (256K x 8)

Opérations / options de tuning disponibles:

  • Injection charge partielle
  • Injection correction
  • Limiteur de couple
  • Débit de masse d'air

Identifiants firmware (16)

N° HardwareN° Software (chip)VersionLogiciel de mise à jourCalculateur
1C1ALEPUPIAM1.HEX 1.34.012 DELPHI DCM3.1
1C1ALFPUPIAM2.HEX 1.34.009 DELPHI DCM3.1
1C1ALGPUPIAM3.HEX 1.34.015 DELPHI DCM3.1
1C1ALHPUPIAM4.HEX 1.34.010 DELPHI DCM3.1
2C1AFBPUQIAM2.HEX 1.34.007 DELPHI DCM3.1
2C1AFDPUQR3J1.HEX 1.34.012 DELPHI DCM3.1
3C11ADPURT0J0.HEX 1.34.002 DELPHI DCM3.1
3C11AFPURT0J8.HEX 1.34.002 DELPHI DCM3.1
3C1AEBPURT0J2.HEX 1.34.002 DELPHI DCM3.1
3C1AECPURT0J4.HEX 1.34.006 DELPHI DCM3.1
3C1AEEPURT2J0.HEX 1.34.012 DELPHI DCM3.1
5C11AAPURT1J3.HEX 1.34.002 DELPHI DCM3.1
5C11BBPURT2J4.HEX 1.34.003 DELPHI DCM3.1
5C11CAPURT2J3.HEX 1.34.006 DELPHI DCM3.1
YC1AAEPUPI6J2.HEX 1.34.008 DELPHI DCM3.1
3C11ABPURR3J0.HEX 1.34.008 FORD EFI WP.41

Notes techniques véhicule

OBD située sous la colonne de direction, au dessus des pédales. Visible ou masquée par un couvercle plastique.

Notes calculateur

Original EPROM PSOP 44 pin 28F200. In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pin 28F200. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY.
Original EPROM PSOP 44 pin 28F200. In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY.

Modules additionnels disponibles

→ See all add-on modules on the shop