English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

ZONGSHEN MOTOR CYCLONE RX3 S 20->20 27kW

ECU DELPHI MT05/MT05.2 · 37 CV (27 kW) · 380 cc · Benzina aspirato

ECU Database › ZONGSHEN MOTOR › ZONGSHEN MOTOR CYCLONE RX3 S 20->20 27kW

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 1 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

BrandZONGSHEN MOTOR
ModelCYCLONE RX3 S
Engine20->20 27kW
Stock power37 CV / 27 kW
Displacement380 cc
FuelBenzina aspirato
Vehicle typeMoto

ECU

ManufacturerDELPHI
ModelMT05/MT05.2
Memory / EPROMSAK XC164CS-32XXX

Available tuning operations / options:

  • Base timing
  • Advance at idle speed
  • Minimum advance allowed
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture for engine temperature at crancking
  • Advance full load
  • Lambda correction
  • Lambda correction for engine temperature after starting
  • Coil charge time
  • Engine idle vs. ECT sensor
  • Air mass flow MAP ratio based
  • Lambda target value
  • Lambda target value - open loop
  • RPM Limiter
  • RPM limiter related to the vehicle speed limiter
  • Speed limiter
  • Maximum advance allowed
  • MAF rate
  • Intake manifold pressure
  • Volumetric efficiency
  • Volumetric efficiency at idle

Firmware identifiers (1)

Hardware No.Software No. (chip)VersionUpdate softwareECU
82111194Q300_V01 1.00.007— DELPHI MT05/MT05.2

ECU notes

This Setting File can be used for serial programming system NewGenius.

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy The Genius The Genius OBD + Bench € 2.500 Buy

Other ZONGSHEN MOTOR

RX3 250
16->19 19kW ZNBD 125
16->19 5kW RE3 380
21-> 27kW CYCLONE RX1 200
17-> 9kW CYCLONE RX650
24->25 52kW

→ All ECUs ZONGSHEN MOTOR