VOLKSWAGEN GOLF 4 (A4) 1.6L 16V 77kW/104HP ME7.5.10

ECU BOSCH ME7.5 · 105 CV (77 kW) · 1600 cc · Benzina aspirato

ECU DatabaseVOLKSWAGEN › VOLKSWAGEN GOLF 4 (A4) 1.6L 16V 77kW/104HP ME7.5.10

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 8 firmware versions

Vehicle data

BrandVOLKSWAGEN
ModelGOLF 4 (A4)
Engine1.6L 16V 77kW/104HP ME7.5.10
Stock power105 CV / 77 kW
Displacement1600 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.5
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Air mass flow (diagnostic)
  • Air mass flow

Firmware identifiers (8)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612067331037366353 1.21.01006A906032EQ 4680 BOSCH ME7.5
02612067341037360956 1.21.01006A906032JB 4629 BOSCH ME7.5
02612068261037354518 1.21.009036906032D 3398 BOSCH ME7.5.10
02612072351037362369 1.21.010032906032A 3204 BOSCH ME7.5.10
02612075321037362584 1.21.005032906032B 3301 BOSCH ME7.5.10
02612077011037362593 1.21.011032906032C 3400 BOSCH ME7.5.10
02612077011037366874 1.21.006032906032C 3401 BOSCH ME7.5.10
02612077021037366875 1.21.011032906032D 3501 BOSCH ME7.5.10

ECU notes

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.