VERVE MOTO TRACKER 250i 21-> 18kW
ECU BOSCH MSE6.0 · 25 hp (18.4 kW) · 250 cc · Benzina aspirato
ECU Database ›
VERVE MOTO › VERVE MOTO TRACKER 250i 21-> 18kW
Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
1 firmware versions
Get the file for this vehicle
Vehicle data
| Brand | VERVE MOTO |
| Model | TRACKER 250i |
| Engine | 21-> 18kW |
| Stock power | 25 hp / 18.4 kW |
| Displacement | 250 cc |
| Fuel | Benzina aspirato |
| Vehicle type | Moto |
ECU
| Manufacturer | BOSCH |
| Model | MSE6.0 |
| Memory / EPROM | Micro BGA ST SPC563M64 - 12288 Kbit - 180000 |
Available tuning operations / options:
- Base timing
- Lambda/AFR full load/WOT
- Lambda/AFR mixture at part load
- Lambda/AFR mixture for engine temperature at crancking
- Spark advance correction for ECT sensor
- Desired engine load calculation
- Exhaust gas temperature
- Factor to correct fuel delivery system
- Weighting map cold-start
- Weighting map cold-start 2
- Engine idle vs. ECT sensor
- Engine idle vs. EOT sensor
- Injection correction for ECT sensor
- Injection correction for ECT sensor 2
- Lambda enrichment for components protection
- RPM Limiter
- Speed limiter
- MAP - limp home mode
- Throttle air mass flow calculation
- Throttle angle limitation
- Throttle angle management
- Volumetric efficiency
Firmware identifiers (1)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|---|---|---|---|
| — | X10404BAF8 | 1.88.008 | F01R00DG1Z | BOSCH MSE6.0 |
ECU notes
Microprocessor SPC563M64 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata