SEAT TOLEDO (5P) 2.0L 16V TDI 103kW/138HP EDC16U1

ECU BOSCH EDC16U1 · 140 CV (103 kW) · 2000 cc · Diesel sovralimentato

ECU DatabaseSEAT › SEAT TOLEDO (5P) 2.0L 16V TDI 103kW/138HP EDC16U1

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 2 firmware versions

Vehicle data

BrandSEAT
ModelTOLEDO (5P)
Engine2.0L 16V TDI 103kW/138HP EDC16U1
Stock power140 CV / 103 kW
Displacement2000 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelEDC16U1
Memory / EPROM29BL802C SSOP56 8Mbit - Flash 3_V 512K x 16

Available tuning operations / options:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure
  • Boost pressure 2
  • EGR valve control
  • Injection period at part load
  • Injection period at full throttle
  • Injection correction
  • Injection 1
  • Torque limiter 2
  • Torque limiter
  • Smoke limiter
  • Pre-injection basic value
  • Air mass flow
  • Overboost timing

Firmware identifiers (2)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02810119091037370891 1.00.02303G906016FH 6185 BOSCH EDC16U1
02810122911037372726 1.00.01203G906016HE 7000 BOSCH EDC16U1

ECU notes

Original EPROM SSOP 56 pins AMD 29BL802CB - Microprocessor MOTOROLA MPC555/6. To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool. This Setting File can be used for serial system NewGenius.

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop