SEAT ALTEA (5P) 2.0L 16V TDI 103kW/138HP EDC16U1

ECU BOSCH EDC16U1 · 140 CV (103 kW) · 2000 cc · Diesel sovralimentato

ECU DatabaseSEAT › SEAT ALTEA (5P) 2.0L 16V TDI 103kW/138HP EDC16U1

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 11 firmware versions

Vehicle data

BrandSEAT
ModelALTEA (5P)
Engine2.0L 16V TDI 103kW/138HP EDC16U1
Stock power140 CV / 103 kW
Displacement2000 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelEDC16U1
Memory / EPROM29BL802C SSOP56 8Mbit - Flash 3_V 512K x 16

Available tuning operations / options:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure
  • Load / throttle position reference
  • EGR valve control
  • Injection period at part load
  • Injection period at full throttle
  • Injection correction
  • Injection correction for IAT sensor
  • Injection 1
  • Torque limiter 2
  • Torque limiter
  • Smoke limiter
  • Speed limiter
  • Pre-injection basic value
  • Air mass flow
  • Overboost timing

Firmware identifiers (11)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1.00.00303G906016AA 8592 BOSCH EDC16U1
02810117281037370514 1.00.01903G906016AA 5990 BOSCH EDC16U1
02810118851037370804 1.00.01103G906016DG 6092 BOSCH EDC16U1
02810119081037370886 1.00.01003G906016FJ 6186 BOSCH EDC16U1
02810119091037372726 1.00.01503G906016HE 7000 BOSCH EDC16U1
02810119091037372726 1.00.01203G906016FH 6185 BOSCH EDC16U1
02810119091037370891 1.00.03303G906016FH 6185 BOSCH EDC16U1
02810119501037372610 1.00.01803G906016HM 7000 BOSCH EDC16U1
02810119501037371436 1.00.01503G906016EG 6256 BOSCH EDC16U1
02810122781037372610 1.00.01903G906016HM 7000 BOSCH EDC16U1
02810122911037372726 1.00.01403G906016HE 7000 BOSCH EDC16U1

ECU notes

Original EPROM SSOP 56 pins AMD 29BL802CB - Microprocessor MOTOROLA MPC555/6. To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool. This Setting File can be used for serial system NewGenius.

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop