English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

SEAT ALTEA (5P) 1.9L 8V TDI 77kW/103HP EDC16U31

ECU BOSCH EDC16U31/U34/CP34 · 105 CV (77 kW) · 1900 cc · Diesel sovralimentato

ECU Database › SEAT › SEAT ALTEA (5P) 1.9L 8V TDI 77kW/103HP EDC16U31

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 13 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

BrandSEAT
ModelALTEA (5P)
Engine1.9L 8V TDI 77kW/103HP EDC16U31
Stock power105 CV / 77 kW
Displacement1900 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelEDC16U31/U34/CP34
Memory / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Available tuning operations / options:

  • Smoke limiter 2
  • Main injection duration angle
  • Main injection duration angle 4
  • Boost pressure limiter
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Boost pressure 2
  • Boost pressure in aftertreatment modes
  • Boost pressure in aftertreatment modes 2
  • Boost pressure in aftertreatment modes 3
  • EGR valve control
  • EGR valve control in aftertreatment modes
  • EGR valve control in aftertreatment modes 2
  • EGR valve control in aftertreatment modes 3
  • EGR valve control in aftertreatment modes 4
  • EGR valve control in aftertreatment modes 5
  • EGR valve control in aftertreatment modes 6
  • Exhaust gas temperature
  • Protection for engine overheating
  • Basic torque management at engine cranking
  • Engine idle vs. ECT sensor
  • Gearbox maximum torque allowed
  • Injection period
  • Injection period - correction
  • Maximum injection period
  • Max injection limit - limp mode
  • J
  • Injection in aftertreatment modes 1
  • Torque limiter
  • Smoke limiter
  • Lambda value of the smoke limitation
  • Lambda value of the smoke limitation in aftertreatment modes
  • Minimum LSU sensor temperature for O2
  • Maximum LSU sensor temperature for O2
  • LSU temperature threshold PID heater governor activation
  • Protection for air load overheating
  • Protection for exhaust gas temperature before turbine
  • Protection for fuel overheating
  • Protection for oil overheating
  • Air mass flow
  • Driver torque request
  • Driver torque request AWD
  • CAT downstream temperature sensor characterization
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for selected gear
  • Torque limiter for for reverse gear
  • Torque limiter for the APS/BPS
  • Torque limiter for the APS/BPS 2
  • Torque limiter in recovery mode
  • Torque limiter in recovery mode 2
  • Volumetric efficiency
  • Turbocharger volumetric efficiency
  • Variable geometry duty cycle limit

Firmware identifiers (13)

Hardware No.Software No. (chip)VersionUpdate softwareECU
—1037376661 1.67.01903G906021SK 1444 BOSCH EDC16U31/U34/CP34
—1037382082 1.67.03203G906021LN 9246 BOSCH EDC16U31/U34/CP34
—1037391570 1.67.02503G906021SM 1849 BOSCH EDC16U31/U34/CP34
—1037391571 1.67.01703G906021SL 1852 BOSCH EDC16U31/U34/CP34
—1037391873 1.67.01703G906021PG 2009 BOSCH EDC16U31/U34/CP34
—1037500162 1.67.02203G906056AM 4524 BOSCH EDC16U31/U34/CP34
—1037389859 1.67.02703G906021SL 1443 BOSCH EDC16U31/U34/CP34
—1037389861 1.67.02503G906021SK 1444 BOSCH EDC16U31/U34/CP34
—1037382685 1.67.02203G906021JN 9516 BOSCH EDC16U31/U34/CP34
—1037381004 1.67.01703G906021JN 9088 BOSCH EDC16U31/U34/CP34
—1037389293 1.67.02003G906021PG 1333 BOSCH EDC16U31/U34/CP34
—1037389854 1.67.01903G906021SM 1442 BOSCH EDC16U31/U34/CP34
—1037379719 1.67.02903G906021LN 8550 BOSCH EDC16U31/U34/CP34

ECU notes

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool.
This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool. Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4.
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial programming system NewGenius. To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool. To work on this ECU you can use NewTrasdata

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

Rapid FR - Modulo Aggiuntivo Dimsport Rapid FR - Modulo Aggiuntivo Dimsport € 189 Buy Rapid FR Compact 2 - Modulo Aggiuntivo Dimsport Rapid FR Compact 2 - Modulo Aggiuntivo Dimsport € 215 Buy

→ See all add-on modules on the shop

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy The Genius The Genius OBD + Bench € 2.500 Buy

Other SEAT

CORDOBA
1.6L 8V 56kW/75HP MOTRONIC CORDOBA
1.8L 8V 66kW/88HP MOTRONIC IBIZA (6K)
1.4L 8V 44kW/59HP MOTRONIC IBIZA (6K)
1.6L 8V 55kW/74HP MOTRONIC IBIZA (6K)
1.3L 8V 40kW/54HP MOTRONIC IBIZA (6K)
1.8L 8V 66kW/88HP MOTRONIC IBIZA (6K)
2.0L 8V 85kW/114HP SIEMENS TOLEDO (1M)
1.6L 8V 54kW/73HP MOTRONIC TOLEDO (1M)
2.0L 8V 85kW/114HP DIGIFANT 1.7 TOLEDO (1M)
2.0L 16V 110kW/147HP 5WP 4201

→ All ECUs SEAT