SEAT ALTEA (5P) 1.9L 8V TDI 77kW/103HP EDC16U1

ECU BOSCH EDC16U1 · 105 CV (77 kW) · 1900 cc · Diesel sovralimentato

ECU DatabaseSEAT › SEAT ALTEA (5P) 1.9L 8V TDI 77kW/103HP EDC16U1

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 7 firmware versions

Vehicle data

BrandSEAT
ModelALTEA (5P)
Engine1.9L 8V TDI 77kW/103HP EDC16U1
Stock power105 CV / 77 kW
Displacement1900 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelEDC16U1
Memory / EPROM29BL802C SSOP56 8Mbit - Flash 3_V 512K x 16

Available tuning operations / options:

  • Boost pressure limiter
  • Boost pressure
  • Injection period at part load
  • Injection period at full throttle
  • Torque limiter
  • Smoke limiter
  • Pre-injection basic value
  • Air mass flow
  • Overboost timing

Firmware identifiers (7)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1.52.008 BOSCH EDC16U1
02810114771037370804 1.00.00203G906016DH 6093 BOSCH EDC16U1
02810118641037370804 1.00.02203G906016DH 6093 BOSCH EDC16U1
02810118851037370803 1.00.00703G906016DG 6092 BOSCH EDC16U1
02810122881037372776 1.00.01603G906016HB 7000 BOSCH EDC16U1
02810122891037372724 1.00.02303G906016HC 7000 BOSCH EDC16U1
02810129221037377217 1.00.01703G906016KL 7825 BOSCH EDC16U1

ECU notes

Original EPROM SSOP 56 pins AMD 29BL802CB - Microprocessor MOTOROLA MPC555/6. To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool. This Setting File can be used for serial system NewGenius.
Original EPROM SSOP 56 pins AMD 29BL802CB - Microprocessor MOTOROLA MPC555/6. To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool.

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop