RENAULT MASTER 3 2.3L dCi 110kW/150HP SID321 — ECU CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 25 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

Brand	RENAULT
Model	MASTER 3
Engine	2.3L dCi 110kW/150HP SID321
Stock power	150 CV / 11 kW
Displacement	2300 cc
Fuel	Diesel sovralimentato
Vehicle type	LCV

ECU

Manufacturer	CONTINENTAL-SIEMENS-VDO
Model	SID321_CONTINENTAL
Memory / EPROM	Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbite

Available tuning operations / options:

Boost pressure limiter for diagnostics
Boost pressure limiter
Boost pressure
Boost pressure in aftertreatment modes
Maximum torque limitation at clutch
Compressor pressure ratio limit for pumping and speed
Effective engine torque setpoint for safety
Exhaust gas temperature value before turbine in regeneration mode
Exhaust gas temperature value before turbine in regular injection mode
Max torque correction factor for APS sensor
Max torque correction factor for APS sensor in aftertreatment modes
Max torque correction factor for soot mass
Max torque correction factor for soot mass in aftertreatment modes
Max torque correction factor for IAT sensor
Max torque correction factor for IAT sensor in aftertreatment modes
Basic torque management at engine cranking
Injection efficiency
Injection opening time related to inj. pressure
Injection opening time related to inj. pressure 3
L
Torque limiter
Torque limiter in full load
Torque limiter in Eco mode
Smoke limiter
Smoke limiter in aftertreatment modes
RPM Limiter
RPM limiter - AT
RPM limit for ECT sensor
Maximum absolute effective torque
Max exhaust gas temperature value before turbine in regeneration mode
Max exhaust gas temperature value before turbine in regular injection mode
Max force table for force to powertrain setpoint conversion
Specific injection pressure limiter
Specific injection pressure limiter in aftertreatment modes
Maximum pressure ratio limit depending on temperature
Specific injection pressure
Specific injection pressure in aftertreatment modes
Air mass flow
Driver torque request
Driver torque request Dynamic mode
Torque value tolerance between level 1 and level 2
Torque value tolerance between level 1 and level 2 - AT
Torque limiter for the APS/BPS in aftertreatment modes
Torque limiter in aftertreatment modes
Torque limiter in aftertreatment modes 2
Torque limiter for EFT sensor
Torque limiter in recovery mode
Torque model - fuel quantity to torque conversion
Torque model - fuel quantity to torque conversion 2
Torque model - fuel quantity to torque conversion in aftertreatment modes
Torque model - torque to fuel quantity conversion
Torque model - torque to fuel quantity conversion - particulate regeneration mode

Firmware identifiers (25)

Hardware No.	Software No. (chip)	Version	Update software	ECU
—	237010374V	1.83.011	237610383V	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237019422S	1.83.005	237619793S	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237018559S	1.83.009	237618740S	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237016670S	1.83.013	237616671S	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237018559S	1.83.045	237618571S	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237015621S	1.83.006	237616626S	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237011330V	1.83.009	237611340V	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237015621S	1.83.015	237616281S	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237019422S	1.83.009	237619786S	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237019422S	1.83.016	237619423S	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237011330V	1.83.012	237611337V	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237011330V	1.83.010	237611339V	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237011330V	1.83.010	237611345V	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237010374V	1.83.009	237610384V	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237018559S	1.83.009	237618741S	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237019422S	1.83.011	237619431S	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237018559S	1.83.011	237619206S	CONTINENTAL-SIEMENS-VDO SID321_CONTINENTAL
—	237011008V	1.83.004	237611014V	CONTINENTAL-SIEMENS-VDO SID321_VITESCO
—	237010644V	1.83.009	237611297V	CONTINENTAL-SIEMENS-VDO SID321_VITESCO
—	237019305S	1.83.014	237619560S	CONTINENTAL-SIEMENS-VDO SID321_VITESCO
—	237019305S	1.83.013	237610820V	CONTINENTAL-SIEMENS-VDO SID321_VITESCO
—	237010644V	1.83.009	237611298V	CONTINENTAL-SIEMENS-VDO SID321_VITESCO
—	237011008V	1.83.011	237611010V	CONTINENTAL-SIEMENS-VDO SID321_VITESCO
—	237010644V	1.83.009	237611295V	CONTINENTAL-SIEMENS-VDO SID321_VITESCO
—	237019305S	1.83.002	237619559S	CONTINENTAL-SIEMENS-VDO SID321_VITESCO

Vehicle technical notes

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

Microprocessor TC297TP_128 This Setting File can be used for serial system NewGenius.

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

Rapid TPM - Modulo Aggiuntivo Dimsport +13 % € 399 Buy

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy

The Genius OBD + Bench € 2.500 Buy

Other RENAULT

19
1.4L 8V 59kW/79HP 19
1.8L 16V 101kW/135HP 21
1.8L 8V 70kW/94HP 21
2.0L TURBO 129kW/173HP 25
2.7L V6 106kW/142HP CLIO 1
1.2L 8V 41kW/54HP CLIO 1
1.4L 8V 57kW/77HP CLIO 1
1.8L 8V 68kW/92HP CLIO 1
1.8L 16V 101kW/135HP CLIO 1
2.0L 16V WILLIAMS 108kW/145HP

→ All ECUs RENAULT