Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 12 firmware versions
Vehicle data
| Brand | RENAULT |
| Model | CLIO 5 |
| Engine | 1.5L dCi 8V 85kW/114HP MD1CS006 |
| Stock power | 116 CV / 85 kW |
| Displacement | 1500 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | MD1CS006 |
| Memory / EPROM | Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte |
Available tuning operations / options:
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Maximum torque limitation at clutch
- Effective engine torque setpoint for safety
- Max accepted exhaust gas temperature value before turbine
- Exhaust gas temperature value before turbine in regeneration mode
- Exhaust gas temperature value before turbine in regular injection mode
- Max torque correction factor for APS sensor
- Max torque correction factor for APS sensor in aftertreatment modes
- Max torque correction factor for soot mass
- Max torque correction factor for soot mass in aftertreatment modes
- Max torque correction factor for IAT sensor
- Max torque correction factor for IAT sensor in aftertreatment modes
- Injection period
- Injection opening time related to inj. pressure
- Torque limiter
- Torque limiter in full load
- Threshold for turbocharger positive deviation
- Maximum absolute effective torque
- Maximum absolute effective torque in ECO mode
- Maximum indicated torque
- Maximum indicated torque in ECO mode
- Maximum indicated torque in regeneration mode
- Maximum indicated torque - safety condition
- Max exhaust gas temperature value before turbine in regeneration mode
- Max exhaust gas temperature value before turbine in regular injection mode
- Maximum intake manifold pressure
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter 4
- Specific injection pressure limiter 5
- Specific injection pressure limiter 6
- Specific injection pressure limiter in aftertreatment modes
- Max rail pressure setpoint increase per s
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure in aftertreatment modes
- Air mass flow
- Temperature before turbine setpoint during npu, spu and injection mode
- Torque limiter for EFT sensor
- Torque limiter for EFT sensor - backflow circuit
- Torque limiter for intake manifold pressure
- Torque limiter for intake manifold pressure 2
- Torque limiter for intake manifold pressure in regeneration mode
- Torque model - fuel quantity to torque conversion
- Torque model - fuel quantity to torque conversion 2
- Torque model - fuel quantity to torque conversion - particulate regeneration mode
- Torque model - torque to fuel quantity conversion
- Torque model - torque to fuel quantity conversion - particulate regeneration mode
Firmware identifiers (12)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
| — | 10SW051399 |
1.94.017 | 10SW062368 |
BOSCH MD1CS006 |
| — | 10SW041282 |
1.94.019 | 10SW051714 |
BOSCH MD1CS006 |
| — | 10SW041282 |
1.94.010 | 10SW053820 |
BOSCH MD1CS006 |
| — | 10SW051399 |
1.94.011 | 10SW096223 |
BOSCH MD1CS006 |
| — | 10SW051399 |
1.94.011 | 10SW067489 |
BOSCH MD1CS006 |
| — | 10SW051399 |
1.94.005 | 10SW067447 |
BOSCH MD1CS006 |
| — | 10SW051399 |
1.94.014 | 10SW053813 |
BOSCH MD1CS006 |
| — | 10SW041282 |
1.94.008 | 10SW096222 |
BOSCH MD1CS006 |
| — | 10SW051399 |
1.94.008 | 10SW110629 |
BOSCH MD1CS006 |
| — | 10SW051399 |
1.94.010 | 10SW053815 |
BOSCH MD1CS006 |
| — | 10SW051399 |
1.94.010 | 10SW057579 |
BOSCH MD1CS006 |
| — | 10SW041282 |
1.94.011 | 10SW053814 |
BOSCH MD1CS006 |
ECU notes
Micro Infineon Tricore TC298TP To work on this ECU you can use NewTrasdata
Get the file for this vehicle
Tools to read and write this ECU