RENAULT CLIO 3 1.2L 16V TCe 74kW/100HP SIM32

ECU CONTINENTAL-SIEMENS-VDO SIM32 · 101 CV (74 kW) · 1200 cc · Benzina sovralimentato

ECU DatabaseRENAULT › RENAULT CLIO 3 1.2L 16V TCe 74kW/100HP SIM32

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 6 firmware versions

Vehicle data

BrandRENAULT
ModelCLIO 3
Engine1.2L 16V TCe 74kW/100HP SIM32
Stock power101 CV / 74 kW
Displacement1200 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerCONTINENTAL-SIEMENS-VDO
ModelSIM32
Memory / EPROMMicro RENESAS - 4096 Kbit - 80000

Available tuning operations / options:

  • Base timing
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Boost pressure limiter
  • Boost pressure
  • Load / throttle position reference
  • Max torque correction factor for APS sensor
  • Factor to correct fuel delivery system
  • Factor to correct fuel delivery system 2
  • Acceleration enrichment
  • Rpm threshold fuel cut
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • RPM Limiter
  • Gear dependent maximum engine speed
  • RPM limit for ECT sensor
  • RPM limit for EOT sensor
  • Knock detection factor
  • Max torque profile
  • Volumetric efficiency
  • Volumetric efficiency - correction

Firmware identifiers (6)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1.73.012 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201109674 1.73.0248201043528 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201015966 1.73.0048200799199 CONTINENTAL-SIEMENS-VDO SIM32
82007006008200942439 1.73.0278200799199 CONTINENTAL-SIEMENS-VDO SIM32
82007006008201015965 1.73.0138200799199 CONTINENTAL-SIEMENS-VDO SIM32
82007006008200807653 1.73.0228200799199 CONTINENTAL-SIEMENS-VDO SIM32

ECU notes

Microprocessor SH7055 Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Microprocessor SH7055 Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata