OPEL / SATURN / VAUXHALL ADAM 1.4L 16V 75kW/99HP DELCO E78

ECU DELCO E78 · 102 CV (75 kW) · 1400 cc · Benzina aspirato

ECU DatabaseOPEL / SATURN / VAUXHALL › OPEL / SATURN / VAUXHALL ADAM 1.4L 16V 75kW/99HP DELCO E78

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 2 firmware versions

Vehicle data

BrandOPEL / SATURN / VAUXHALL
ModelADAM
Engine1.4L 16V 75kW/99HP DELCO E78
Stock power102 CV / 75 kW
Displacement1400 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerDELCO
ModelE78
Memory / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5566 24576 Kbit - 0x300000

Available tuning operations / options:

  • Engine ignition timing versus temperature
  • Advance at idle speed
  • Lambda/AFR full load/WOT
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Desired engine load calculation
  • Variable exhaust camshaft timing 2
  • Variable exhaust camshaft timing
  • ECT for fan engagement
  • Engine idle
  • Engine idle in Park position
  • Variable intake camshaft timing 2
  • Variable intake camshaft timing
  • Torque limiter 2
  • Torque limiter
  • Lambda enrichment - open loop
  • RPM Limiter
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for for reverse gear

Firmware identifiers (2)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1264713612665803 1.91.00755494107 DELCO E78
1266717212683718 1.91.00455507607 DELCO E78

ECU notes

Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual. To work on this ECU you can use NewTrasdata
Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual.