NISSAN LATITUDE 1.5L 16V dCi 81kW/109HP SID305
ECU CONTINENTAL-SIEMENS-VDO SID305 · 110 CV (81 kW) · 1500 cc · Diesel sovralimentato
ECU Database ›
NISSAN › NISSAN LATITUDE 1.5L 16V dCi 81kW/109HP SID305
Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 1 firmware versions
Get the file for this vehicle
Vehicle data
| Brand | NISSAN |
| Model | LATITUDE |
| Engine | 1.5L 16V dCi 81kW/109HP SID305 |
| Stock power | 110 CV / 81 kW |
| Displacement | 1500 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | CONTINENTAL-SIEMENS-VDO |
| Model | SID305 |
| Memory / EPROM | MICRO ST TRICORE - 12032 Kbit - 178000 |
Available tuning operations / options:
- Boost pressure limiter
- BAP setpoint limitation depending on before particulate filter pressure in aftertreatment modes
- BAP setpoint limitation depending on before particulate filter pressure in regular injection mode
- Boost pressure
- Boost pressure 2
- Boost pressure in aftertreatment modes
- Boost pressure in regular injection mode
- Effective engine torque setpoint for safety
- Exhaust gas temperature value before turbine in regeneration mode
- Exhaust gas temperature value before turbine in regular injection mode
- Basic torque management at engine cranking
- Injection opening time related to inj. pressure
- Torque limiter for diagnostic
- Maximum torque correction in ECO mode to compensate resisting torque
- Maximum absolute effective torque
- Maximum indicated torque
- Maximum indicated torque in regeneration mode
- Main torque model during regular combustion mode
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Mass air flow - gear 1 (N or R)
- Air mass flow
- Mass air flow - gear 3
- Mass air flow - gear 4
- Mass air flow - gear 5
- Mass air flow - gear 6
- Air mass flow in aftertreatment modes
- Torque limiter for EFT sensor
- Torque limiter for intake manifold pressure
- Torque limiter for intake manifold pressure in regeneration mode
- Torque model - fuel quantity to torque conversion
- Torque model - fuel quantity to torque conversion - particulate regeneration mode
- Torque model - torque to fuel quantity conversion - particulate regeneration mode
Firmware identifiers (1)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|---|---|---|---|
| 0037R | 1478R | 1.83.006 | 3405R | CONTINENTAL-SIEMENS-VDO SID305 |
ECU notes
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Add-on modules available
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Get the file for this vehicle
Tools to read and write this ECU
Other NISSAN
200 SX
1.8L 16V TURBO 125kW/169HP MEC-DIL 300 ZX
3.0L V6 24V TURBO168kW/225HP HITACHI PATHFINDER (R50)
4.0L V6 24V 200kW/266HP HITACHI PRIMERA (P11)
2.0L TDI TERRANO (WD21)
2.7L TDI 92kW/123HP PLCC ALMERA (N16)
2.2L 8V TD Di 81kW/109HP EDC15M PATROL/SAFARI Y60-Y61
3.0L TDi 116kW/158HP ZEXEL SUNNY (N14)
2.0L 16V 112kW/150HP PRIMERA (P11)
2.0L TDI 66kW/90CV ZEXEL ATLEON
140 3.9L 4Cil. 8V 102kW/139HP MS6.4
1.8L 16V TURBO 125kW/169HP MEC-DIL 300 ZX
3.0L V6 24V TURBO168kW/225HP HITACHI PATHFINDER (R50)
4.0L V6 24V 200kW/266HP HITACHI PRIMERA (P11)
2.0L TDI TERRANO (WD21)
2.7L TDI 92kW/123HP PLCC ALMERA (N16)
2.2L 8V TD Di 81kW/109HP EDC15M PATROL/SAFARI Y60-Y61
3.0L TDi 116kW/158HP ZEXEL SUNNY (N14)
2.0L 16V 112kW/150HP PRIMERA (P11)
2.0L TDI 66kW/90CV ZEXEL ATLEON
140 3.9L 4Cil. 8V 102kW/139HP MS6.4