MERCEDES E CLASS W211 E240 2.6L V6 120kW/160HP ME2.8

ECU BOSCH ME2.8 · 163 CV (12 kW) · 2600 cc · Benzina aspirato

ECU DatabaseMERCEDES › MERCEDES E CLASS W211 E240 2.6L V6 120kW/160HP ME2.8

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 1 firmware versions

Vehicle data

BrandMERCEDES
ModelE CLASS W211
EngineE240 2.6L V6 120kW/160HP ME2.8
Stock power163 CV / 12 kW
Displacement2600 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME2.8
Memory / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

  • Base timing
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture at part load
  • Optimal spark timing/MBT
  • Advance at part load
  • Load / throttle position reference
  • RPM Limiter
  • Speed limiter
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Relative permissible torque from the pedal position in torque limitation
  • Requested engine filling

Firmware identifiers (1)

Hardware No.Software No. (chip)VersionUpdate softwareECU
11215312791037351808 1.16.008 BOSCH ME2.8

ECU notes

Original EPROM PSOP 44 pins 29F400BB. This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY.