McCORMICK X7.6 X7.650 6.7L 118kW/159HP EDC7UC31
ECU BOSCH EDC7UC31 · 160 CV (118 kW) · 6700 cc · Diesel sovralimentato
ECU Database ›
McCORMICK › McCORMICK X7.6 X7.650 6.7L 118kW/159HP EDC7UC31
Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
3 firmware versions
Get the file for this vehicle
Vehicle data
| Brand | McCORMICK |
| Model | X7.6 |
| Engine | X7.650 6.7L 118kW/159HP EDC7UC31 |
| Stock power | 160 CV / 118 kW |
| Displacement | 6700 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Tractor |
ECU
| Manufacturer | BOSCH |
| Model | EDC7UC31 |
| Memory / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Available tuning operations / options:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure
- Boost pressure 2
- Boost pressure F (temperature)
- Desired fuel quantity map for open loop
- EGR valve control
- Exhaust gas temperature
- Max CAT temperature threshold for component protection
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Injection opening time related to inj. pressure
- Injection mass at high temperature
- Injection mass at low temperature
- Maximum fuel quantity for turbine overspeed prevention
- Injection limit - turbocharger protection
- Max injection limit
- Max injection limit 2
- Fuel quantity limitation after cold start
- Max injection limit - limp mode
- L
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- MAP - limp home mode
- Maximum indicated torque
- Max torque profile
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 2
- Protection for fuel overheating
- Specific injection pressure limiter
- Specific injection pressure limiter for diagnostics
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure in aftertreatment modes
- Driver torque request
- Torque limiter for selected gear
- Torque limiter in recovery mode
- Torque model - torque to fuel quantity conversion
- Torque model for performance limiter
- Torque model with performance limiter stage 1 is active
- Torque model with performance limiter stage 2 active
- Torque model with performance limiter after coldstart 1 active
- Torque model with performance limiter stage 3 active
- Turbocharger volumetric efficiency
Firmware identifiers (3)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|---|---|---|---|
| — | — | 1.67.008 | P340VF01 gyojyg03_ld4 | BOSCH EDC7UC31 |
| — | — | 1.67.008 | P340VF01 ito4yg05_ld4 | BOSCH EDC7UC31 |
| — | — | 1.67.009 | P340VF01 ito4yg05_ld4 | BOSCH EDC7UC31 |
ECU notes
To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.
Get the file for this vehicle
Tools to read and write this ECU
Other McCORMICK
MTX
MTX 200 CUMMINS 5.9L 143kW/191HP CM554 XTX
XTX 145 (T3) 6.7L 107kW/143HP EDC7UC31 XTX
XTX 165 (T3) 6.7L 134kW/179HP EDC7UC31 XTX
XTX 185 (T3) 6.7L 126kW/169HP EDC7UC31 MTX
MTX 185 6.7L 134kW/179HP EDC7C1-C2 TTX
TTX 190 (T3) 6.7L 132kW/177HP EDC7UC31 TTX
TTX 210 (T3) 6.7L 146kW/195HP EDC7UC31 TTX
TTX 230 (T3) 6.7L 157kW/210HP EDC7UC31 MC
MC 115 (T3) 4.4L 81kW/108HP PERKINS TIER3 MC
MC 130 (T3) 4.4L 92kW/124HP PERKINS TIER3
MTX 200 CUMMINS 5.9L 143kW/191HP CM554 XTX
XTX 145 (T3) 6.7L 107kW/143HP EDC7UC31 XTX
XTX 165 (T3) 6.7L 134kW/179HP EDC7UC31 XTX
XTX 185 (T3) 6.7L 126kW/169HP EDC7UC31 MTX
MTX 185 6.7L 134kW/179HP EDC7C1-C2 TTX
TTX 190 (T3) 6.7L 132kW/177HP EDC7UC31 TTX
TTX 210 (T3) 6.7L 146kW/195HP EDC7UC31 TTX
TTX 230 (T3) 6.7L 157kW/210HP EDC7UC31 MC
MC 115 (T3) 4.4L 81kW/108HP PERKINS TIER3 MC
MC 130 (T3) 4.4L 92kW/124HP PERKINS TIER3