Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 21 firmware versions
Vehicle data
| Brand | MAZDA |
| Model | 3 (BK) |
| Engine | 1.6L 16V MZR-CD 80kW/107HP EDC16+ |
| Stock power | 109 CV / 8 kW |
| Displacement | 1600 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | EDC16C34 |
| Memory / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Available tuning operations / options:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure in aftertreatment modes
- Boost pressure F (temperature)
- EGR valve control
- EGR valve control 2
- Basic torque management at engine cranking
- Injection period
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Injection period in aftertreatment modes
- Injection period in aftertreatment modes 2
- Injection period in aftertreatment modes 3
- Max injection limit
- Max injection limit - limp mode
- J
- Injection in aftertreatment modes 1
- Injection in aftertreatment modes 2
- Torque limiter 2
- Torque limiter
- Lambda value of the smoke limitation
- Injection quantity for engine overheating protection
- Protection for fuel overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure in aftertreatment modes
- Specific pressure injection after starting
- Air mass flow
- Driver torque request
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear - AT
- Torque limiter for the APS/BPS
- Torque limiter in recovery mode
- Variable geometry duty cycle limit in regeneration mode
Firmware identifiers (21)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| — | 1037378487 |
1.67.014 | 1037391373 |
BOSCH EDC16C34 |
| — | 1037380497 |
1.67.007 | 1037382744 |
BOSCH EDC16C34 |
| — | 1037382744 |
1.67.019 | 1037382744 |
BOSCH EDC16C34 |
| — | 1037378487 |
1.67.008 | 1037380497 |
BOSCH EDC16C34 |
| — | 1037374401 |
1.67.008 | 1037382491 |
BOSCH EDC16C34 |
| — | 1037382744 |
1.67.007 | 1037380497 |
BOSCH EDC16C34 |
| — | 1037380497 |
1.67.014 | 1037380497 |
BOSCH EDC16C34 |
| — | 1037379069 |
1.67.012 | 1037380497 |
BOSCH EDC16C34 |
| — | 1037374401 |
1.67.013 | 1037400536 |
BOSCH EDC16C34 |
| — | 1037382744 |
1.67.010 | 1037400536 |
BOSCH EDC16C34 |
| — | 1037379069 |
1.67.013 | 1037391373 |
BOSCH EDC16C34 |
| — | 1037382742 |
1.67.014 | 1037382742 |
BOSCH EDC16C34 |
| — | 1037379069 |
1.67.015 | 1037382491 |
BOSCH EDC16C34 |
| — | 1037400536 |
1.67.018 | 1037400536 |
BOSCH EDC16C34 |
| — | 1037398941 |
1.67.009 | 1037400536 |
BOSCH EDC16C34 |
| — | 1037376265 |
1.67.006 | 1037383314 |
BOSCH EDC16C34 |
| — | 1037379069 |
1.67.021 | 1037379069 |
BOSCH EDC16C34 |
| — | 1037382744 |
1.67.009 | 1037541463 |
BOSCH EDC16C34 |
| — | 1037374401 |
1.67.009 | 1037545935 |
BOSCH EDC16C34 |
| — | 1037374401 |
1.67.007 | 1037541463 |
BOSCH EDC16C34 |
| — | 1037382744 |
1.67.011 | 1037391373 |
BOSCH EDC16C34 |
ECU notes
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Add-on modules available
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Get the file for this vehicle
Tools to read and write this ECU
