English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

MASH X-RIDE 650 21->25 29kW

ECU DELPHI MT05.3 · 40 CV (29 kW) · 640 cc · Benzina aspirato

ECU Database › MASH › MASH X-RIDE 650 21->25 29kW

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 4 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

BrandMASH
ModelX-RIDE 650
Engine21->25 29kW
Stock power40 CV / 29 kW
Displacement640 cc
FuelBenzina aspirato
Vehicle typeMoto

ECU

ManufacturerDELPHI
ModelMT05.3
Memory / EPROMMicro ST572L64

Available tuning operations / options:

  • Base timing
  • Minimum advance allowed
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture for engine temperature at crancking
  • Advance full load
  • Lambda correction
  • Lambda correction for engine temperature after starting
  • Coil charge time
  • Engine idle vs. ECT sensor
  • Air mass flow MAP ratio based
  • Lambda target value
  • Lambda target value - open loop
  • RPM Limiter
  • Speed limiter
  • Maximum advance allowed
  • MAF rate
  • Intake manifold pressure
  • Volumetric efficiency
  • Volumetric efficiency at idle

Firmware identifiers (4)

Hardware No.Software No. (chip)VersionUpdate softwareECU
42009931G053M5DS320 1.00.00642915327 DELPHI MT05.3
0143602442915327 1.00.007— DELPHI MT05/MT05.2
9137606242915327 1.00.005— DELPHI MT05/MT05.2
9141134442915327 1.00.003— DELPHI MT05/MT05.2

ECU notes

This Setting File can be used for serial programming system NewGenius.
Microprocessor BGA FREESCALE SPC57xxx This Setting File can be used for serial system NewGenius.

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy The Genius The Genius OBD + Bench € 2.500 Buy

Other MASH

FIVE HUNDRED 400
17->20 20kW FIFTY 50
21->25 2kW SIDE FORCE 445
21->24 21kW X-RIDE 50
22->25 2kW

→ All ECUs MASH