Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
11 firmware versions
Vehicle data
| Brand | LANCIA |
| Model | PHEDRA |
| Engine | 2.2L MJET 125kW/168HP EDC16CP39 |
| Stock power | 170 CV / 125 kW |
| Displacement | 2200 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | EDC16CP39 |
| Memory / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Available tuning operations / options:
- Boost pressure
- Boost pressure in aftertreatment modes
- EGR valve control
- EGR valve control 2
- Exhaust gas temperature
- Exhaust gas temperature 2
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection opening time related to inj. pressure
- Max injection limit
- Max injection limit 2
- Max injection limit - limp mode
- Initialization values over pressure control valve
- J
- Torque limiter 2
- Boost pressure deviation limits for basic charge air pressure
- Boost pressure deviation limits for basic charge air pressure 2
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature for O2
- LSU temperature setpoint
- LSU temperature threshold PID heater governor activation
- Injection quantity for engine overheating protection
- Protection for fuel overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter for diagnostics
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific pressure injection after starting
- Requested crankshaft/transmission torque
- CAT downstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear
- Torque limiter for for reverse gear
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Volumetric efficiency
- Volumetric efficiency - correction
- Turbocharger volumetric efficiency
- Turbocharger volumetric efficiency 2
- Variable geometry duty cycle limit
Firmware identifiers (11)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| — | 1037386095 |
1.67.010 | 1037391763 |
BOSCH EDC16CP39 |
| — | 1037386066 |
1.67.009 | 1037391764 |
BOSCH EDC16CP39 |
| — | 1037391722 |
1.67.010 | 1037398206 |
BOSCH EDC16CP39 |
| — | 1037391722 |
1.67.012 | 1037398205 |
BOSCH EDC16CP39 |
| — | 1037386059 |
1.67.010 | 1037386305 |
BOSCH EDC16CP39 |
| — | 1037386059 |
1.67.009 | 1037386059 |
BOSCH EDC16CP39 |
| — | 1037391722 |
1.67.013 | 1037391722 |
BOSCH EDC16CP39 |
| — | 1037386066 |
1.67.026 | 1037386292 |
BOSCH EDC16CP39 |
| — | 1037386095 |
1.67.011 | 1037391764 |
BOSCH EDC16CP39 |
| — | 1037386059 |
1.67.014 | 1037391763 |
BOSCH EDC16CP39 |
| 0281015199 | 1037386095 |
1.67.014 | 1037386095 |
BOSCH EDC16CP39 |
Vehicle technical notes
ECU located in the engine bay behind/close to the battery. Difficulty: easy
OBD with lid located in the central tunnel, ion the tray between the gear lever and the air conditioning controls.
ECU notes
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Get the file for this vehicle
Tools to read and write this ECU
