HYUNDAI STAREX 2.5L CRDi 124kW/167HP EDC16C39

ECU BOSCH EDC16C39 · 169 CV (124 kW) · 2500 cc · Benzina aspirato

ECU DatabaseHYUNDAI › HYUNDAI STAREX 2.5L CRDi 124kW/167HP EDC16C39

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 7 firmware versions

Vehicle data

BrandHYUNDAI
ModelSTAREX
Engine2.5L CRDi 124kW/167HP EDC16C39
Stock power169 CV / 124 kW
Displacement2500 cc
FuelBenzina aspirato
Vehicle typeLCV

ECU

ManufacturerBOSCH
ModelEDC16C39
Memory / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Available tuning operations / options:

  • Boost pressure limiter
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Boost pressure in aftertreatment modes
  • EGR valve control
  • EGR valve control 2
  • Exhaust gas temperature
  • Protection for engine overheating
  • Basic torque management at engine cranking
  • Engine idle vs. ECT sensor
  • Injection period
  • Injection opening time related to inj. pressure
  • Max injection limit
  • Max injection limit - limp mode
  • Initialization values over pressure control valve
  • J
  • Torque limiter 2
  • Boost pressure deviation limits for basic charge air pressure
  • Boost pressure deviation limits for basic charge air pressure 2
  • Torque limiter
  • Torque limiter during particulate filter overloading - pressure
  • Lambda value of the smoke limitation
  • Minimum LSU sensor temperature for O2
  • Maximum LSU sensor temperature for O2
  • LSU temperature threshold PID heater governor activation
  • Maximum indicated torque
  • Injection quantity for engine overheating protection
  • Injection quantity for engine overheating protection 3
  • Protection for fuel overheating
  • Protection for fuel overheating 2
  • Protection for oil overheating
  • Pressure control map over pressure regulating valve
  • Specific injection pressure limiter
  • Specific injection pressure limiter 2
  • Specific injection pressure
  • Specific injection pressure in aftertreatment modes
  • Driver torque request
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for for reverse gear
  • Torque limiter in recovery mode
  • Torque limiter in recovery mode 2
  • Volumetric efficiency
  • Volumetric efficiency - correction
  • Turbocharger volumetric efficiency
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit 2

Firmware identifiers (7)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1037520548 1.67.007P373C00N BOSCH EDC16C39
1037520549 1.67.002P373C00I BOSCH EDC16C39
1037394236 1.67.003P373C00I BOSCH EDC16C39
1037520546 1.67.005P373C00N BOSCH EDC16C39
1037520542 1.67.002P373C00N BOSCH EDC16C39
1037379769 1.67.003P373701I BOSCH EDC16C39
1037520544 1.67.003P373C00N BOSCH EDC16C39

ECU notes

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata In cars with automatic gearbox the file read by serial system is not correct. In order to modify the car start from the original certified file of the setting file.