HYUNDAI ACCENT MK3 1.4L 16V 72kW/97HP M7.9.8

ECU BOSCH M7.9.8/MG7.9.8 · 98 CV (72 kW) · 1400 cc · Benzina aspirato

ECU DatabaseHYUNDAI › HYUNDAI ACCENT MK3 1.4L 16V 72kW/97HP M7.9.8

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 6 firmware versions

Vehicle data

BrandHYUNDAI
ModelACCENT MK3
Engine1.4L 16V 72kW/97HP M7.9.8
Stock power98 CV / 72 kW
Displacement1400 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelM7.9.8/MG7.9.8
Memory / EPROMMICRO ST - 6656 Kbit

Available tuning operations / options:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Factor to correct fuel delivery system
  • Lambda driver wish
  • Optimal engine moment
  • Throttle angle management

Firmware identifiers (6)

Hardware No.Software No. (chip)VersionUpdate softwareECU
9001040235GMC_AG4DES0_5000 1.14.003 BOSCH M7.9.8/MG7.9.8
9001040236GMC_AG4DFS1_5000 1.14.002 BOSCH M7.9.8/MG7.9.8
9001040257GJB_AG4DES0_5000 1.06.002 BOSCH M7.9.8/MG7.9.8
9001040360GMC_C54DFS1_5000 1.14.002 BOSCH M7.9.8/MG7.9.8
9030930734GMC_6G4DFS5_5000 1.06.004 BOSCH M7.9.8/MG7.9.8
9030933803GMC_844DFS3_5000 1.06.005 BOSCH M7.9.8/MG7.9.8

ECU notes

Microprocessor ST10F275 ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! To work on this ECU you can use NewTrasdata
Microprocessor ST10F275 To work on this ECU you can use NewTrasdata