FIAT QUBO 1.3L 16V MJET 70kW/94HP MJ8DF/8F2 — ECU MARELLI MJD8F2

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 5 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

Brand	FIAT
Model	QUBO
Engine	1.3L 16V MJET 70kW/94HP MJ8DF/8F2
Stock power	95 CV / 7 kW
Displacement	1300 cc
Fuel	Diesel sovralimentato
Vehicle type	LCV

ECU

Manufacturer	MARELLI
Model	MJD8F2
Memory / EPROM	MICRO BGA MOTOROLA FRESCALE con Flash interna MPC5565 16384 Kbit - 0x200000

Available tuning operations / options:

Maximum engine boost pressure F (atmospheric pressure)
Boost pressure
Engine efficiency
EGR valve control
Basic torque management at engine cranking
Gearbox maximum torque allowed
Injection period
Injection period 2
Injection opening time related to inj. pressure
Injection opening time related to inj. pressure 2
Max injection limit
L
Torque limiter
Lambda value of the smoke limitation
Max torque profile
Rail pressure threshold for torque limitation
Specific injection pressure
Air mass flow
RPM step reference
Driver torque request
Driver torque request Sport mode
Torque limiter for EFT sensor
Torque limit table for ECT sensor
Take-off torque law in Normal mode
Variable geometry duty cycle limit
Variable geometry duty cycle - steady state
Variable geometry duty cycle - transient state

Firmware identifiers (5)

Hardware No.	Software No. (chip)	Version	Update software	ECU
MJ8DFHW00P	9743F587	1.01.022	—	MARELLI MJD8F2
MJ8DFHW00P	9744F292	1.01.011	—	MARELLI MJD8F2
MJ8F3HW10C	254AQ310	1.01.026	—	MARELLI MJD8F2
MJ8F3HW10L	3044Q605	1.01.003	—	MARELLI MJD8F3
MJ8F3HW10L	284AQ610	1.01.012	—	MARELLI MJD8F3

Vehicle technical notes

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

Microprocessor FMPC 5565 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual.