FIAT PANDA (319) 1.2L 8V 51kW/68HP IAW9GF

ECU MARELLI 9GF · 69 CV (51 kW) · 1200 cc · Benzina aspirato

ECU DatabaseFIAT › FIAT PANDA (319) 1.2L 8V 51kW/68HP IAW9GF

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 24 firmware versions

Vehicle data

BrandFIAT
ModelPANDA (319)
Engine1.2L 8V 51kW/68HP IAW9GF
Stock power69 CV / 51 kW
Displacement1200 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerMARELLI
Model9GF
Memory / EPROMMicro BGA ST SPC564A7 - 16384 Kbit - 200000

Available tuning operations / options:

  • Base timing
  • Base timing - CNG
  • Base timing - E100
  • Base timing - E22
  • Minimum advance allowed
  • Minimum advance allowed - CNG
  • Minimum advance allowed - E100
  • Minimum advance allowed - E22
  • Minimum advance allowed protection
  • Minimum advance allowed protection - CNG
  • Optimal spark timing/MBT
  • Optimal spark timing/MBT correction
  • Optimal spark timing/MBT correction - CNG
  • Optimal spark timing/MBT correction - E100
  • Optimal spark timing/MBT correction - E22
  • Optimal spark timing/MBT - CNG
  • Spark advance correction for ECT sensor
  • Spark advance correction for ECT sensor - CNG
  • Base lambda - cold
  • Base Lambda - hot
  • Base Lambda - hot - CNG
  • Electronic throttle control
  • Average power effective limitation
  • Average torque effective limitation
  • Engine idle vs. ECT sensor
  • Maximum indicated torque
  • Max torque profile
  • Maximum vehicle acceleration
  • Torque management in Normal mode
  • Torque management Sport mode
  • Power Control in Normal mode
  • Power Control in Sport mode
  • Power limit torque table
  • Resistant torque table
  • Torque limit table for ECT sensor
  • Take-off torque law in Normal mode
  • Take-off torque law in Normal mode with power control
  • Take-off torque law in Sport mode
  • Take-off torque law in Sport mode with power control

Firmware identifiers (24)

Hardware No.Software No. (chip)VersionUpdate softwareECU
MM9GFHW0006M01PGBG 1.00.009 MARELLI 9GF
MM9GFHW0006L13PGAP 1.00.007 MARELLI 9GF
MM9GFHW0006M20PGDI 1.00.014 MARELLI 9GF
MM9GFHW0006Q41PGDP 1.00.013 MARELLI 9GF
MM9GFHW0006M01PLBS 1.00.005 MARELLI 9GF
MM9GFHW0006G00_LCT 1.00.006 MARELLI 9GF
MM9GFHW0006M01PGBS 1.00.015 MARELLI 9GF
MM9GFHW0006M01PGBT 1.00.004 MARELLI 9GF
MM9GFHW0006F05_LCI 1.00.008 MARELLI 9GF
MM9GFHW0034L13_P32 1.00.013 MARELLI 9GF
MM9GFHW0034M10PVCQ 1.00.008 MARELLI 9GF
MM9GFHW0034E04_P24 1.00.010 MARELLI 9GF
MM9GFHW0034E03_P22 1.00.011 MARELLI 9GF
MM9GFHW0034Q32PVDF 1.00.007 MARELLI 9GF
MM9GFHW0034L13PUAN 1.00.015 MARELLI 9GF
MM9GFHW0034E04_P25 1.00.017 MARELLI 9GF
MM9GFHW0096S82PGFG 1.00.009 MARELLI 9GF
MM9GFHW0096S61PGES 1.00.004 MARELLI 9GF
MM9GFHW0505Q43PTDS 1.00.011 MARELLI 9GF
MM9GFHWN015N00PCCG 1.00.015 MARELLI 9GF
MM9GFHWN015Q31FADF 1.00.007 MARELLI 9GF
MM9GFHWN015Q31PADF 1.00.016 MARELLI 9GF
MM9GFHWN015Q43PRDR 1.00.011 MARELLI 9GF
MM9GFHWN015Q43FMDR 1.00.009 MARELLI 9GF

Vehicle technical notes

OBD is located on the right side of the driver near the battery
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

Microprocessor BGA SPC564A70 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop