FIAT PANDA (319) 1.2L 8V 51kW/68HP IAW5SF8

ECU MARELLI 5SF8.M4 · 69 CV (51 kW) · 1200 cc · Benzina aspirato

ECU DatabaseFIAT › FIAT PANDA (319) 1.2L 8V 51kW/68HP IAW5SF8

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 7 firmware versions

Vehicle data

BrandFIAT
ModelPANDA (319)
Engine1.2L 8V 51kW/68HP IAW5SF8
Stock power69 CV / 51 kW
Displacement1200 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerMARELLI
Model5SF8.M4
Memory / EPROMMicro ST - 6656 Kbit

Available tuning operations / options:

  • Advance at idle speed
  • Advance at part load
  • Advance full load
  • Injection at part load
  • RPM Limiter
  • Specific air mass charge 2
  • Air mass flow

Firmware identifiers (7)

Hardware No.Software No. (chip)VersionUpdate softwareECU
IAW5SFHW4095017X19 1.00.006 MARELLI 5SF8.M4
IAW5SFHW4011811HC25 1.00.006 MARELLI 5SF8.MR
IAW5SFHW4011810HC22 1.00.012 MARELLI 5SF8.MR
IAW5SFHW4011810HC23 1.00.004 MARELLI 5SF8.MR
IAW5SFHW4136235LCE 1.00.004 MARELLI 5SF8.MR
IAW5SFHW4136237LCL 1.00.005 MARELLI 5SF8.MR
IAW5SFHW4092022FAF 1.00.005 MARELLI 5SF8E2

Vehicle technical notes

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

Microprocessor ST10F296 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius.
Microprocessor ST10F296 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Microprocessor ST10F296 This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop