Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 2 firmware versions
Vehicle data
| Brand | FIAT |
| Model | 500 C (312) |
| Engine | 1.4L 8V 75kW/101HP IAW8GMF |
| Stock power | 102 CV / 75 kW |
| Displacement | 1400 cc |
| Fuel | Benzina aspirato |
| Vehicle type | Auto |
ECU
Available tuning operations / options:
- Optimal spark timing/MBT
- Advance at part load
- Advance correction
- Base lambda - cold
- Base Lambda - hot
- Boost pressure limiter
- Electronic throttle control
- Compressor pressure ratio limit for pumping and speed
- Average power effective limitation
- Average torque effective limitation
- Advance limiter
- Basic value setpoint Lambda sensor
- RPM Limiter
- Maximum Upstream pressure in event of Normal boost modality
- Maximum Upstream pressure in event of normal boost modality, Sport mode activated
- Maximum Upstream pressure in event of overboost modality
- Maximum Upstream pressure in event of overboost modality, Sport modality activated
- Max torque profile
- Torque management in Normal mode
- Torque management Sport mode
- Power Control in Normal mode
- Power Control in Sport mode
- Power limit torque table
- Resistant torque table
- Torque limit table for ECT sensor
- Take-off torque law in Normal mode
- Take-off torque law in Normal mode with power control
- Take-off torque law in Sport mode
- Take-off torque law in Sport mode with power control
- Wastegate duty-cycle
Firmware identifiers (2)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| MM8GMBHW555 | M340C04 |
1.91.005 | 68083994AD |
MARELLI 8GMB/8GMC/8GMF/8GMW/8GSF/8GSW |
| MM8GMBHW625 | F426F03 |
1.01.013 | 68086110AD |
MARELLI 8GMB/8GMC/8GMF/8GMW/8GSF/8GSW |
Vehicle technical notes
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU notes
Microprocessor FMPC 5565 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual.
Get the file for this vehicle
Tools to read and write this ECU
