DODGE CHALLENGER 5.7L V8 280kW/375HP NGC4

ECU MOTOROLA NGC4 · 381 CV (28 kW) · 5700 cc · Benzina aspirato

ECU DatabaseDODGE › DODGE CHALLENGER 5.7L V8 280kW/375HP NGC4

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 6 firmware versions

Vehicle data

BrandDODGE
ModelCHALLENGER
Engine5.7L V8 280kW/375HP NGC4
Stock power381 CV / 28 kW
Displacement5700 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerMOTOROLA
ModelNGC4
Memory / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5554 16384 Kbit - 0x200000

Available tuning operations / options:

  • Minimum advance allowed
  • Optimal spark timing/MBT
  • Advance at part load
  • Spark advance correction for ECT sensor
  • Advance correction - overheating protection
  • Advance full load
  • Lambda correction for engine temperature after starting
  • Load / throttle position reference
  • Load / throttle position reference 2
  • Exhaust gas temperature
  • Exhaust gas temperature 2
  • Engine idle vs. ECT sensor
  • Engine idle in Park position
  • Engine idle in Park position 2
  • Torque limiter
  • Lambda enrichment for components protection
  • RPM Limiter 2
  • RPM limiter in Park position
  • RPM limit for ECT sensor
  • Knock detection factor
  • Speed limiter
  • Cooling fan activation
  • Volumetric efficiency

Firmware identifiers (6)

Hardware No.Software No. (chip)VersionUpdate softwareECU
05150149AJETC07P09V18.2_ENGV18.2_TXX 1.80.00505094966AJ MOTOROLA NGC4
05150359ACETC10P06V00.2_ENGV00.2_TXX 1.80.01405187665AC MOTOROLA NGC4
05150359ACETC09P13V05.0_ENGV05.0_TXX 1.80.04405187912AE MOTOROLA NGC4
05150359ACETC10P06V00.2_ENGV00.2_TXX 1.80.01705187665AC MOTOROLA NGC4
05150359ACETC09P13V06.0_ENGV06.0_TXX 1.80.00568061225AA MOTOROLA NGC4
05150359ACETC09P14V02.0_ENGV02.0_TXX 1.80.02205187912AH MOTOROLA NGC4

ECU notes

Microprocessor FMPC 5554 To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.
Microprocessor FMPC 5554 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata