CITROEN C4 SPACETOURER 2.0L 16V BlueHDI 120kW/161HP DCM7.1A
ECU DELPHI DCM7.1A · 163 CV (12 kW) · 2000 cc · Diesel sovralimentato
ECU Database ›
CITROEN › CITROEN C4 SPACETOURER 2.0L 16V BlueHDI 120kW/161HP DCM7.1A
Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
2 firmware versions
Get the file for this vehicle
Vehicle data
| Brand | CITROEN |
| Model | C4 SPACETOURER |
| Engine | 2.0L 16V BlueHDI 120kW/161HP DCM7.1A |
| Stock power | 163 CV / 12 kW |
| Displacement | 2000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | DELPHI |
| Model | DCM7.1A |
| Memory / EPROM | Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848Kbyte |
Available tuning operations / options:
- Boost pressure limiter
- Boost pressure limiter 2
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure limit control
- Boost pressure
- Boost pressure F (temperature)
- Load / throttle position reference
- Load / throttle position reference 2
- Load / throttle position reference 3
- Max exhaust gas temperature curve for full load
- Exhaust gas temperature threshold for component protection
- Basic torque management at engine cranking
- Injection period
- Injection period 10
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection period 7
- Injection period 8
- Injection period 9
- Injection opening time related to inj. pressure
- Injection 1
- J
- Injection 3
- Injection 4
- Injection 5
- Injection 6
- Injection 7
- Torque limiter
- Torque limiter for diagnostic
- Torque limiter for smoke limitation
- Torque limiter for smoke limitation 2
- Maximum indicated torque
- Maximum indicated virtual torque
- Maximum indicated virtual torque 2
- Maximum engine power
- Throttle air mass flow calculation
- Throttle air mass flow calculation 2
- Max torque profile
- Max torque profile - AT
- Max torque profile for diagnostic
- Max torque profile - MT
- Max torque profile for IAT sensor
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter 3
- Specific injection pressure limiter for diagnostics
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 3
- Specific injection pressure 4
- Specific injection pressure 6
- Specific injection pressure 7
- Specific pressure injection after starting
- Specific pressure injection after starting 2
- Driver torque request
- Driver torque request for high speed
- Driver torque request for low speed
- Driver torque request from MAP sensor
- Driver torque request from MAP sensor - interpolation
- Driver torque request at the start
- Driver torque request for reverse gear
- Torque limiter for gear-shift too long
- Torque limiter for selected gear
- Torque limiter for the APS/BPS
- Torque limiter for EFT sensor
- Torque limit table for EOT sensor
- Torque limit table for the rail pressure demand
- Torque limit table for ECT sensor
- Take-off torque law from MAP sensor
Firmware identifiers (2)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|---|---|---|---|
| 9818035080 | 9818035080 | 1.00.008 | 9695628780 | DELPHI DCM7.1A |
| 9818035080 | 9818035080 | 1.00.008 | 9696392580 | DELPHI DCM7.1A |
ECU notes
Microprocessor TC297TP_96 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
