English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

CHRYSLER CROSSFIRE 3.2L V6 KOMPRESSOR 246kW/330HP ME2.8.1

ECU BOSCH ME2.8 · 334 CV (246 kW) · 3200 cc · Benzina sovralimentato

ECU Database › CHRYSLER › CHRYSLER CROSSFIRE 3.2L V6 KOMPRESSOR 246kW/330HP ME2.8.1

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 3 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

BrandCHRYSLER
ModelCROSSFIRE
Engine3.2L V6 KOMPRESSOR 246kW/330HP ME2.8.1
Stock power334 CV / 246 kW
Displacement3200 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME2.8
Memory / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

  • Base timing
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture at part load
  • Optimal spark timing/MBT
  • Boost limiter correction for APS/BPS sensor
  • Load / throttle position reference
  • Engine filling management
  • RPM Limiter
  • RPM limiter for LSD
  • Boost pressure linearization
  • Speed limiter
  • Maximum indicated torque
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Relative permissible torque from the pedal position in torque limitation
  • Requested engine filling
  • Variable intake pulsation correction

Firmware identifiers (3)

Hardware No.Software No. (chip)VersionUpdate softwareECU
11215365791037365248 1.16.009— BOSCH ME2.8
11215365791037365234 1.16.014— BOSCH ME2.8
11215387791037377841 1.16.020— BOSCH ME2.8

Vehicle technical notes

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU notes

Original EPROM PSOP 44 pins 29F400BB. This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY.

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy The Genius The Genius OBD + Bench € 2.500 Buy

Other CHRYSLER

VOYAGER
2.5L TD 85kW/115HP MOTRONIC EDC VOYAGER
3.1L TD 103kW/138HP MOTRONIC EDC VOYAGER
2.0L 16V 98kW/131HP 28F200 PT CRUISER
2.0L 16V 104kW/139HP CHRYSLER VOYAGER
2.5L 8V CRD 104kW/140HP EDC15C3 PT CRUISER
2.2L 16V CRD 89kW/119HP EDC15C3 NEON
2.0L 16V 98kW/131HP CHRYSLER STRATUS
2.5L V6 121kW/162HP CHRYSLER STRATUS
2.0L 16V 98kW/131HP CHRYSLER VOYAGER
3.3L V6 128kW/172HP CHRYSLER

→ All ECUs CHRYSLER