CHRYSLER 300 Mk1 3.5L 24V V6 183kW/246HP NCG4

ECU MOTOROLA NGC4 · 249 CV (183 kW) · 3500 cc · Benzina aspirato

ECU DatabaseCHRYSLER › CHRYSLER 300 Mk1 3.5L 24V V6 183kW/246HP NCG4

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 5 firmware versions

Vehicle data

BrandCHRYSLER
Model300 Mk1
Engine3.5L 24V V6 183kW/246HP NCG4
Stock power249 CV / 183 kW
Displacement3500 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerMOTOROLA
ModelNGC4
Memory / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5554 16384 Kbit - 0x200000

Available tuning operations / options:

  • Minimum advance allowed
  • Optimal spark timing/MBT
  • Advance at part load
  • Spark advance correction for ECT sensor
  • Advance correction - overheating protection
  • Advance full load
  • Lambda correction for engine temperature after starting
  • Load / throttle position reference
  • Load / throttle position reference 2
  • Exhaust gas temperature
  • Exhaust gas temperature 2
  • Engine idle vs. ECT sensor
  • Engine idle in Park position
  • Engine idle in Park position 2
  • Torque limiter
  • Lambda enrichment for components protection
  • RPM Limiter 2
  • RPM limiter in Park position
  • RPM limit for ECT sensor
  • Knock detection factor
  • Speed limiter
  • Cooling fan activation
  • Volumetric efficiency

Firmware identifiers (5)

Hardware No.Software No. (chip)VersionUpdate softwareECU
05150149AJETC07P09V12.0_ENGV12.0_TXX 1.80.00405187023AE MOTOROLA NGC4
05150149AJETC07P09V18.0_ENGV18.0_TXX 1.80.00305187023AI MOTOROLA NGC4
05150149AJETC07P09V18.0_ENGV18.0_TXX 1.80.00968026436AI MOTOROLA NGC4
05150149AJETC07P09V18.2_ENGV18.2_TXX 1.80.00605094910AK MOTOROLA NGC4
05150149AJETC07P09V10.0_ENGV00.0_TXX 1.80.00605187023AD MOTOROLA NGC4

Vehicle technical notes

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

Microprocessor FMPC 5554 To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.