CASE IH AF 7120 9.0L 6L 310kW/422HP EDC7UC31
ECU BOSCH EDC7UC31 · 421 CV (31 kW) · 9000 cc · Diesel sovralimentato
ECU Database ›
CASE IH › CASE IH AF 7120 9.0L 6L 310kW/422HP EDC7UC31
Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
4 firmware versions
Get the file for this vehicle
Vehicle data
| Brand | CASE IH |
| Model | AF |
| Engine | 7120 9.0L 6L 310kW/422HP EDC7UC31 |
| Stock power | 421 CV / 31 kW |
| Displacement | 9000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Tractor |
ECU
| Manufacturer | BOSCH |
| Model | EDC7UC31 |
| Memory / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Available tuning operations / options:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure
- Boost pressure 2
- Boost pressure F (temperature)
- Desired fuel quantity map for open loop
- EGR valve control
- Exhaust gas temperature
- Max CAT temperature threshold for component protection
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Injection opening time related to inj. pressure
- Injection mass at high temperature
- Injection mass at low temperature
- Maximum fuel quantity for turbine overspeed prevention
- Injection limit - turbocharger protection
- Max injection limit
- Max injection limit 2
- Fuel quantity limitation after cold start
- Max injection limit - limp mode
- L
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- MAP - limp home mode
- Maximum indicated torque
- Max torque profile
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 2
- Protection for fuel overheating
- Specific injection pressure limiter
- Specific injection pressure limiter for diagnostics
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure in aftertreatment modes
- Driver torque request
- Torque limiter for selected gear
- Torque limiter in recovery mode
- Torque model - torque to fuel quantity conversion
- Torque model for performance limiter
- Torque model with performance limiter stage 1 is active
- Torque model with performance limiter stage 2 active
- Torque model with performance limiter after coldstart 1 active
- Turbocharger volumetric efficiency
Firmware identifiers (4)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|---|---|---|---|
| — | — | 1.67.017 | P340VD02 Mwmuya02.cc2 | BOSCH EDC7UC31 |
| — | — | 1.67.011 | P340VD03 Mwmuyb04.cb2 | BOSCH EDC7UC31 |
| — | — | 1.67.013 | P340VD03 Mwmuyb04.cb2 | BOSCH EDC7UC31 |
| — | — | 1.67.006 | P340V91 wmubn10.cc0 | BOSCH EDC7UC31 |
ECU notes
To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.
Get the file for this vehicle
Tools to read and write this ECU
Other CASE IH
AFX
8010 10.3L 294kW/400HP MS6.2 MAGNUM MX
240 8.3L 176kW/236HP CM554 MAGNUM MX
270 8.3L 199kW/267HP CM570 CHX
420 12.9L 314kW/428HP MS6.2 AFX
8010 10.3L 334kW/455HP EDC7UC31 AF
2388 8.3L 6L 205kW/276HP CM554 AF
2388 8.3L 6L 220kW/295HP CM850 AFX
7010 9.0L 291kW/390HP EDC7UC31 AFX
8790 16.0L V8 405kW/543HP TEMIC PUMA
165 6.7L 123kW/165HP EDC16C39
8010 10.3L 294kW/400HP MS6.2 MAGNUM MX
240 8.3L 176kW/236HP CM554 MAGNUM MX
270 8.3L 199kW/267HP CM570 CHX
420 12.9L 314kW/428HP MS6.2 AFX
8010 10.3L 334kW/455HP EDC7UC31 AF
2388 8.3L 6L 205kW/276HP CM554 AF
2388 8.3L 6L 220kW/295HP CM850 AFX
7010 9.0L 291kW/390HP EDC7UC31 AFX
8790 16.0L V8 405kW/543HP TEMIC PUMA
165 6.7L 123kW/165HP EDC16C39