CASE CONSTRUCTION WHEEL LOADERS 821E 6.7L 6L 169kW/230HP EDC7UC31
ECU BOSCH EDC7UC31 · 230 CV (169 kW) · 6700 cc · Diesel sovralimentato
ECU Database ›
CASE CONSTRUCTION › CASE CONSTRUCTION WHEEL LOADERS 821E 6.7L 6L 169kW/230HP EDC7UC31
Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 2 firmware versions
Get the file for this vehicle
Vehicle data
| Brand | CASE CONSTRUCTION |
| Model | WHEEL LOADERS |
| Engine | 821E 6.7L 6L 169kW/230HP EDC7UC31 |
| Stock power | 230 CV / 169 kW |
| Displacement | 6700 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Ohv |
ECU
| Manufacturer | BOSCH |
| Model | EDC7UC31 |
| Memory / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Available tuning operations / options:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure
- Boost pressure 2
- Boost pressure F (temperature)
- Desired fuel quantity map for open loop
- EGR valve control
- Exhaust gas temperature
- Max CAT temperature threshold for component protection
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Injection opening time related to inj. pressure
- Injection mass at high temperature
- Injection mass at low temperature
- Maximum fuel quantity for turbine overspeed prevention
- Injection limit - turbocharger protection
- Max injection limit
- Max injection limit 2
- Max injection limit - limp mode
- L
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- MAP - limp home mode
- Maximum indicated torque
- Max torque profile
- Injection quantity for engine overheating protection
- Protection for fuel overheating
- Specific injection pressure limiter
- Specific injection pressure limiter for diagnostics
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure in aftertreatment modes
- Driver torque request
- Torque limiter for selected gear
- Torque limiter in recovery mode
- Torque model - torque to fuel quantity conversion
- Torque model for performance limiter
- Torque model with performance limiter stage 1 is active
- Torque model with performance limiter stage 2 active
- Torque model with performance limiter after coldstart 1 active
- Turbocharger volumetric efficiency
Firmware identifiers (2)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|---|---|---|---|
| — | — | 1.67.014 | P340V91 itkrbn08.cwt | BOSCH EDC7UC31 |
| — | — | 1.67.008 | P340V91 itkrbn05.cwe | BOSCH EDC7UC31 |
ECU notes
To work on this ECU you can use NewTrasdata This Setting File can be used for serial programming system NewGenius.
Add-on modules available
Get the file for this vehicle
Tools to read and write this ECU
Other CASE CONSTRUCTION
WHEEL LOADERS
821F 6.7L 6L 172kW/234HP EDC7UC31 WHEEL LOADERS
521F 4.5L 4L 106kW/142HP EDC7UC31 BACKHOE LOADERS
580ST 3.4L 72kW/97HP EDC17C49 CRAWLER DOZERS
2050M 6.7L 6L 173kW/232HP EDC7UC31 EXCAVATORS
CX 210D 5.2L 4L 119kW/160HP DCU17HD01 EXCAVATORS
CX 300D 7.8L 154kW/207HP TRANSTRON SH7059 EXCAVATORS
CX 350D 7.8L 6L 200kW/268HP TRANSTRON 4HK1 EXCAVATORS
CX 470C 9.8L 6L 270kW/362HP DCU17HD01 BACKHOE LOADERS
590ST 3.4L 82kW/110HP EDC17C49 BACKHOE LOADERS
695ST 3.4L 82kW/110HP EDC17C49
821F 6.7L 6L 172kW/234HP EDC7UC31 WHEEL LOADERS
521F 4.5L 4L 106kW/142HP EDC7UC31 BACKHOE LOADERS
580ST 3.4L 72kW/97HP EDC17C49 CRAWLER DOZERS
2050M 6.7L 6L 173kW/232HP EDC7UC31 EXCAVATORS
CX 210D 5.2L 4L 119kW/160HP DCU17HD01 EXCAVATORS
CX 300D 7.8L 154kW/207HP TRANSTRON SH7059 EXCAVATORS
CX 350D 7.8L 6L 200kW/268HP TRANSTRON 4HK1 EXCAVATORS
CX 470C 9.8L 6L 270kW/362HP DCU17HD01 BACKHOE LOADERS
590ST 3.4L 82kW/110HP EDC17C49 BACKHOE LOADERS
695ST 3.4L 82kW/110HP EDC17C49