BMW 4 SERIES G22/G23/G26 M440i 3.0L L6 24V 285kW/382HP DME_86T0

ECU BOSCH MG1CS024 (DME_86T0) · 387 CV (285 kW) · 3000 cc · Benzina sovralimentato

ECU DatabaseBMW › BMW 4 SERIES G22/G23/G26 M440i 3.0L L6 24V 285kW/382HP DME_86T0

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 4 firmware versions

Vehicle data

BrandBMW
Model4 SERIES G22/G23/G26
EngineM440i 3.0L L6 24V 285kW/382HP DME_86T0
Stock power387 CV / 285 kW
Displacement3000 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelMG1CS024 (DME_86T0)
Memory / EPROMMicro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte

Available tuning operations / options:

  • Base timing
  • Base timing 2
  • Camshaft maximum lift
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture at part load
  • Optimal spark timing/MBT
  • Optimal spark timing/MBT 2
  • Knock correction advance max
  • Boost pressure limiter for diagnostics
  • Max accepted exhaust gas temperature value after turbine
  • Max accepted exhaust gas pressure at exhaust manifold
  • Engine torque reducing factor depending on temperature
  • HFM/HLM air flow high limit
  • HFM/HLM air flow low limit
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit
  • High fuel pressure pump limit 2
  • Intake pressure protection
  • Intake valve lift - cold
  • Intake valve lift - catalyst heating
  • Intake valve lift - start for ECT sensor
  • Intake valve lift - warm
  • Basic value Lambda sensor
  • Torque limiter
  • Lambda minimum value for components protection
  • Lambda fat-running limit for component protection
  • Knock detection factor
  • Maximum compression ratio
  • Maximum possible engine charge
  • Maximum engine power
  • Maximum engine pressure ratio
  • Maximum relative engine air charge
  • Max torque profile - AT
  • Max torque profile - MT
  • Optimal engine moment
  • Pressure ratio depending on IAT 2
  • Requested engine filling
  • Driver torque request
  • Driver torque request Eco mode - AT
  • Driver torque request Eco mode - AT - 2
  • Driver torque request Normal mode - AT
  • Driver torque request Sport mode - AT
  • Driver torque request Eco mode
  • Driver torque request Eco mode - MT
  • Driver torque request Eco mode - MT - 2
  • Driver torque request Normal mode - MT
  • Driver torque request Sport mode - MT
  • Driver torque request Sport mode - MT - 2
  • Driver torque request Sport mode
  • Torque limiter for selected gear
  • Torque limiter for selected gear - AT
  • Torque limit table for IAT sensor
  • Torque limiter to prevent preignition
  • Turbocharger volumetric efficiency
  • Wastegate duty-cycle

Firmware identifiers (4)

Hardware No.Software No. (chip)VersionUpdate softwareECU
000048DC012D0100005D5550480C 1.94.0030000A977504898 BOSCH MG1CS024 (DME_86T0)
000048DC012D0100005D55506406 1.94.0070000929C50640C BOSCH MG1CS024 (DME_86T0)
000048DC012D0100005D55466408 1.94.00300007CF346643E BOSCH MG1CS024 (DME_86T0)
000048DC012D0100005D5550480C 1.94.0050000929C504899 BOSCH MG1CS024 (DME_86T0)

ECU notes

Micro Infineon Tricore TC298TP Serial protocol enabled ONLY on New Genius, it does not work on Genius To work on this ECU you can use NewTrasdata
Micro Infineon Tricore TC298TP This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata