ECU Database ›
BMW › BMW 3 SERIES E90/E91/E92/E93 318d 2.0L L4 16V 100kW/136HP EDC17C06
Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 9 firmware versions
Vehicle data
| Brand | BMW |
| Model | 3 SERIES E90/E91/E92/E93 |
| Engine | 318d 2.0L L4 16V 100kW/136HP EDC17C06 |
| Stock power | 136 CV / 1 kW |
| Displacement | 2000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | EDC17C06 |
| Memory / EPROM | TRICORE con DFLASH & PFLASH - 180000 |
Available tuning operations / options:
- Maximum engine boost pressure F (atmospheric pressure)
- Maximum engine boost pressure F (atmospheric pressure) 2
- Boost pressure
- Boost pressure 2
- Boost pressure 3
- Maximum torque limitation at clutch
- EGR valve control
- EGR valve control 2
- Max accepted exhaust gas temperature value at particulate sensor
- Protection for engine overheating
- Protection for engine overheating 2
- Protection for engine overheating 3
- Injection period at full throttle
- Injection period at full throttle 2
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Injection period
- Maximum injection period
- Maximum injection period 2
- Injection opening time related to inj. pressure
- Injection 1
- J
- L
- Torque limiter
- Torque limiter for diagnostic
- Torque limiter during particulate filter overloading - pressure
- Torque limiter during particulate filter overloading - temperature
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature limit - heater control
- LSU temperature threshold PID heater governor activation
- Speed limiter
- Max torque profile
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter 3
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Driver torque request
- Torque limiter for EFT sensor
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
- Variable geometry duty cycle limit 4
Firmware identifiers (9)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| — | 07823422 |
1.00.024 | 08506489 |
BOSCH EDC17C06 |
| — | 07812501 |
1.00.011 | 07810048 |
BOSCH EDC17C06 |
| — | 07823422 |
1.00.018 | 08506491 |
BOSCH EDC17C06 |
| — | 07811701 |
1.00.030 | 07811631 |
BOSCH EDC17C06 |
| — | 07823422 |
1.00.023 | 08506490 |
BOSCH EDC17C06 |
| — | 07809001 |
1.00.021 | 07809116 |
BOSCH EDC17C06 |
| — | 08506375 |
1.00.038 | 08508547 |
BOSCH EDC17C06 |
| — | 07810001 |
1.00.019 | 07810048 |
BOSCH EDC17C06 |
| — | 07812501 |
1.00.023 | 07812788 |
BOSCH EDC17C06 |
Vehicle technical notes
OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.
ECU notes
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
MICRO Infineon Tricore TC1766 This Setting File can be used for serial system NewGenius. WARNING: it is possible to use the serial protocol only if the New Genius is equipped with the F32GN067 dongle. This software is equipped with a serial ANTITUNING system. For writing with the New Genius it is necessary to use the original certified file of the setting file. To work on this ECU you can use NewTrasdata
Get the file for this vehicle
Tools to read and write this ECU
