BENELLI TNT 250 17->20 23kW
ECU DELPHI MT05/MT05.2 · 31 CV (23 kW) · 250 cc · Benzina aspirato
ECU Database ›
BENELLI › BENELLI TNT 250 17->20 23kW
Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
11 firmware versions
Get the file for this vehicle
Vehicle data
| Brand | BENELLI |
| Model | TNT 250 |
| Engine | 17->20 23kW |
| Stock power | 31 CV / 23 kW |
| Displacement | 250 cc |
| Fuel | Benzina aspirato |
| Vehicle type | Moto |
ECU
| Manufacturer | DELPHI |
| Model | MT05/MT05.2 |
| Memory / EPROM | SAK XC164CS-32XXX |
Available tuning operations / options:
- Base timing
- Advance at idle speed
- Minimum advance allowed
- Lambda/AFR full load/WOT
- Lambda/AFR mixture for engine temperature at crancking
- Advance full load
- Lambda correction
- Lambda correction for engine temperature after starting
- Coil charge time
- Engine idle vs. ECT sensor
- Air mass flow MAP ratio based
- Lambda target value
- Lambda target value - open loop
- RPM Limiter
- RPM limiter related to the vehicle speed limiter
- Speed limiter
- Maximum advance allowed
- MAF rate
- Intake manifold pressure
- Volumetric efficiency
- Volumetric efficiency at idle
Firmware identifiers (11)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|---|---|---|---|
| — | LF250708 | 1.00.006 | — | DELPHI MT05/MT05.2 |
| 42400439 | 20120207 | 1.00.008 | — | DELPHI MT05/MT05.2 |
| 42460111 | 20120207 | 1.00.004 | — | DELPHI MT05/MT05.2 |
| 51430089 | 20120207 | 1.00.005 | — | DELPHI MT05/MT05.2 |
| 61340087 | 20120207 | 1.00.006 | — | DELPHI MT05/MT05.2 |
| 70460427 | ST25CA17 | 1.00.004 | — | DELPHI MT05/MT05.2 |
| 72271055 | ST25CA17 | 1.00.005 | — | DELPHI MT05/MT05.2 |
| 72410151 | ST25CA17 | 1.00.005 | — | DELPHI MT05/MT05.2 |
| 72780869 | ST25CA17 | 1.00.003 | — | DELPHI MT05/MT05.2 |
| 72890299 | 20120207 | 1.00.009 | — | DELPHI MT05/MT05.2 |
| 80611077 | ST25CA17 | 1.00.005 | — | DELPHI MT05/MT05.2 |
ECU notes
This Setting File can be used for serial programming system NewGenius.