English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

AUDI S3 (8L) 1.8L TURBO 155kW/208HP ME7.5

ECU BOSCH ME7.5 · 211 CV (155 kW) · 1800 cc · Benzina sovralimentato

ECU Database › AUDI › AUDI S3 (8L) 1.8L TURBO 155kW/208HP ME7.5

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 15 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

BrandAUDI
ModelS3 (8L)
Engine1.8L TURBO 155kW/208HP ME7.5
Stock power211 CV / 155 kW
Displacement1800 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.5
Memory / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

  • Base timing
  • Optimal spark timing/MBT
  • Boost pressure limiter 3
  • Boost pressure limiter 4
  • Boost pressure limiter 5
  • Boost pressure limit control
  • Desired engine load calculation
  • Exhaust gas temperature
  • Lambda enrichment for components protection
  • RPM Limiter
  • RPM Limiter 2
  • Boost pressure linearization
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Maximum boost pressure load
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Offset tolerance depending on permissible torque
  • Relative permissible torque from the pedal position in torque limitation
  • Maximum pressure ratio limit depending on temperature
  • Driver torque request
  • Driver torque request Sport mode
  • Throttle angle management

Firmware identifiers (15)

Hardware No.Software No. (chip)VersionUpdate softwareECU
—— 1.21.041— BOSCH ME7.5
02612049001037352771 1.21.0148N0906018 0004 BOSCH ME7.5
02612049001037350751 1.21.0508N0906018 0003 BOSCH ME7.5
02612064421037352465 1.21.0288L0906018K 0004 BOSCH ME7.5
02612064421037352049 1.21.0428L0906018K 0002 BOSCH ME7.5
02612064421037352377 1.21.0348L0906018K 0003 BOSCH ME7.5
02612064421037354091 1.21.0178L0906018K 0005 BOSCH ME7.5
02612067941037360284 1.21.0428N0906018J 0003 BOSCH ME7.5
02612067941037360314 1.21.0508N0906018J 0004 BOSCH ME7.5
02612067941037360154 1.21.0258N0906018J 0001 BOSCH ME7.5
02612067961037354092 1.21.0488L0906018N 0002 BOSCH ME7.5
02612067961037352820 1.21.0278L0906018N 0001 BOSCH ME7.5
02612072131037360229 1.21.0108N0906018AG 0003 BOSCH ME7.5
02612072131037354898 1.21.0088N0906018AG 0001 BOSCH ME7.5
02612072131037360320 1.21.0228N0906018AG 0004 BOSCH ME7.5

Vehicle technical notes

OBD with lid located in the central tunnel, ion the tray between the gear lever and the air conditioning controls.

ECU notes

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy The Genius The Genius OBD + Bench € 2.500 Buy

Other AUDI

100
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP

→ All ECUs AUDI