AUDI A6 (C6/4F) 3.0L V6 24V TFSI 213kW/286HP SIMOS8.3

ECU CONTINENTAL-SIEMENS-VDO SIMOS 8.3 · 290 CV (213 kW) · 3000 cc · Benzina sovralimentato

ECU DatabaseAUDI › AUDI A6 (C6/4F) 3.0L V6 24V TFSI 213kW/286HP SIMOS8.3

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 10 firmware versions

Vehicle data

BrandAUDI
ModelA6 (C6/4F)
Engine3.0L V6 24V TFSI 213kW/286HP SIMOS8.3
Stock power290 CV / 213 kW
Displacement3000 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerCONTINENTAL-SIEMENS-VDO
ModelSIMOS 8.3
Memory / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

Available tuning operations / options:

  • Base timing
  • Boost pressure limiter
  • Desired engine load calculation
  • Factor to correct fuel delivery system
  • High pressure fuel pump setpoint
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • RPM Limiter
  • RPM Limiter 2
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Max torque profile
  • Optimal engine moment
  • Driver torque request

Firmware identifiers (10)

Hardware No.Software No. (chip)VersionUpdate softwareECU
CAJA4F1907551 1.00.0094F1910551 0030 CONTINENTAL-SIEMENS-VDO SIMOS 8.3
CAJA 1.33.0104F1910551B 0060 CONTINENTAL-SIEMENS-VDO SIMOS 8.3
CAJA4F1907551 1.33.0234F1910551 0080 CONTINENTAL-SIEMENS-VDO SIMOS 8.3
CAJA4F1907551 1.33.0134F1910551 0050 CONTINENTAL-SIEMENS-VDO SIMOS 8.3
CAJA4F1907551 1.33.0084F1910551 0060 CONTINENTAL-SIEMENS-VDO SIMOS 8.3
CCAA 1.00.0064F1910551A 0080 CONTINENTAL-SIEMENS-VDO SIMOS 8.3
CCAA4F1907551 1.33.0074F1910551D 0020 CONTINENTAL-SIEMENS-VDO SIMOS 8.3
CCAA4F1907551 1.00.0134F1910551D 0010 CONTINENTAL-SIEMENS-VDO SIMOS 8.3
CCAA4F1907551B 1.00.0114F1910551D 0030 CONTINENTAL-SIEMENS-VDO SIMOS 8.3
CCAA4F1907551 1.00.0104F1910551D 0050 CONTINENTAL-SIEMENS-VDO SIMOS 8.3

ECU notes

MICRO Infineon Tricore TC1796 TOTAL FILE WARNING - New Genius with security Dongle: the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. WARNING - only for New Genius without security Dongle: the ECU can be modified via OBDII with New Genius ONLY after the unlock performed through the PATCH UNLOCK with New Trasdata. To work on this ECU you can use NewTrasdata

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop