AUDI A6 (C6/4F) 2.0L 16V TFSI 147KW/197HP MED9.1/5

ECU BOSCH MED9.1/5 · 200 CV (147 kW) · 2000 cc · Benzina sovralimentato

ECU DatabaseAUDI › AUDI A6 (C6/4F) 2.0L 16V TFSI 147KW/197HP MED9.1/5

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 8 firmware versions

Vehicle data

BrandAUDI
ModelA6 (C6/4F)
Engine2.0L 16V TFSI 147KW/197HP MED9.1/5
Stock power200 CV / 147 kW
Displacement2000 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelMED9.1/5
Memory / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Available tuning operations / options:

  • Advance at idle speed
  • Advance at part load
  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure limiter 3
  • Load / throttle position reference
  • Injection at part load
  • Speed / RPM limiter
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • RPM Limiter
  • Knock detection factor
  • P
  • Max boost pressure control
  • Air mass flow

Firmware identifiers (8)

Hardware No.Software No. (chip)VersionUpdate softwareECU
0261S022101037377605 1.58.0078E0910115K 0010 BOSCH MED9.1/5
0261S022911037381604 1.58.0144F2910115B 0030 BOSCH MED9.1/5
0261S022911037380065 1.58.0134F2910115B 0020 BOSCH MED9.1/5
0261S022911037386852 1.58.0114F2910115B 0040 BOSCH MED9.1/5
0261S022911037377676 1.58.0124F2910115B 0010 BOSCH MED9.1/5
0261S022921037386457 1.58.0074F2910115C 0050 BOSCH MED9.1/5
0261S025581037396795 1.58.0144F2910115J 0020 BOSCH MED9.1/5
0261S025591037396800 1.58.0064F2910115K 0020 BOSCH MED9.1/5

Vehicle technical notes

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU notes

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocesor Motorola MPC561/2/3/4. To work on this ECU you can use NewTrasdata WARNING! ECU MED9 - IX/CL = injection at full load, decrease the values to enrich the injection This Setting File can be used for serial system NewGenius.

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop