AUDI A6 (C5/4B) 4.2L V8 40V 220kW/295HP ME7.5

ECU BOSCH ME7.5 · 299 CV (22 kW) · 4200 cc · Benzina aspirato

ECU DatabaseAUDI › AUDI A6 (C5/4B) 4.2L V8 40V 220kW/295HP ME7.5

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 1 firmware versions

Vehicle data

BrandAUDI
ModelA6 (C5/4B)
Engine4.2L V8 40V 220kW/295HP ME7.5
Stock power299 CV / 22 kW
Displacement4200 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.5
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Knock detection factor
  • Speed limiter
  • Load/throttle position reference - AT
  • Air mass flow

Firmware identifiers (1)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612063631037352193 1.21.0164D0907560H 0001 BOSCH ME7.5

Vehicle technical notes

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.