AUDI A6 (C4/4A) 1.8L 16V TURBO 132KW/180HP ME7.5
ECU BOSCH ME7.5 · 179 CV (132 kW) · 1800 cc · Benzina sovralimentato
ECU Database ›
AUDI › AUDI A6 (C4/4A) 1.8L 16V TURBO 132KW/180HP ME7.5
Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
2 firmware versions
Get the file for this vehicle
Vehicle data
| Brand | AUDI |
| Model | A6 (C4/4A) |
| Engine | 1.8L 16V TURBO 132KW/180HP ME7.5 |
| Stock power | 179 CV / 132 kW |
| Displacement | 1800 cc |
| Fuel | Benzina sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | ME7.5 |
| Memory / EPROM | 29F800 PSOP44 8Mbit - Flash 512K x 16 |
Available tuning operations / options:
- Base timing
- Optimal spark timing/MBT
- Boost pressure limiter 4
- Boost pressure limiter 5
- Boost pressure limit control
- Desired engine load calculation
- Lambda correction for engine temperature after starting
- Maximum pressure ratio limit for diagnosis
- Exhaust gas temperature
- Lambda enrichment for components protection
- RPM Limiter
- Boost pressure linearization
- Lambda driver wish
- Knock detection factor
- Maximum boost pressure load
- Throttle air mass flow calculation
- Optimal engine moment
- Offset tolerance depending on permissible torque
- Offset tolerance depending on permissible torque 2
- Relative permissible torque from the pedal position in torque limitation
- Throttle angle management
Firmware identifiers (2)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|---|---|---|---|
| 0261206528 | 1037360289 | 1.21.020 | 4B0906018AD 0002 | BOSCH ME7.5 |
| 0261207635 | 1037362357 | 1.21.010 | 4B0906018DB 0001 | BOSCH ME7.5 |
ECU notes
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Get the file for this vehicle
Tools to read and write this ECU
Other AUDI
100
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP