AUDI A4 (B6/8E/8H) 2.4L V6 24V 121KW/162HP ME7.1/5

ECU BOSCH ME7.1/5 · 165 CV (121 kW) · 2400 cc · Benzina aspirato

ECU DatabaseAUDI › AUDI A4 (B6/8E/8H) 2.4L V6 24V 121KW/162HP ME7.1/5

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 14 firmware versions

Vehicle data

BrandAUDI
ModelA4 (B6/8E/8H)
Engine2.4L V6 24V 121KW/162HP ME7.1/5
Stock power165 CV / 121 kW
Displacement2400 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.1/5
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Load/throttle position reference - AT
  • Air mass flow

Firmware identifiers (14)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612048931037354748 1.21.0063B00907552 0002 BOSCH ME7.1/5
02612061221037350079 1.21.0123B0907552J 0001 BOSCH ME7.1/5
02612063971037350283 1.21.0123B0907552L 0002 BOSCH ME7.1/5
02612063971037354089 1.21.0073B0907552L 0003 BOSCH ME7.1/5
02612074941037363419 1.21.0108E0909552 0004 BOSCH ME7.1/5
02612074951037363408 1.21.0078E0909552A 0004 BOSCH ME7.1/5
02612074971037367707 1.21.0068E0909552C 0050 BOSCH ME7.1/5
02612075001037362353 1.21.0103B0907552BJ 0001 BOSCH ME7.1/5
02612080381037366397 1.21.0078E0909552M 0004 BOSCH ME7.1/5
02612080381037366138 1.21.0198E0909552M 0003 BOSCH ME7.1/5
02612080391037366137 1.21.0088E0909552N 0003 BOSCH ME7.1/5
02612080391037366398 1.21.0078E0909552N 0004 BOSCH ME7.1/5
02612080391037367683 1.21.0048E0909552N 0050 BOSCH ME7.1/5
02612083711037367272 1.21.0088B0909552R 0010 BOSCH ME7.1/5

Vehicle technical notes

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.