AUDI A4 (B5/8D) 1.8L 16V TURBO 110kW/148HP PSOP M5.9.2

ECU BOSCH M5.9.2 · 150 CV (11 kW) · 1800 cc · Benzina sovralimentato

ECU DatabaseAUDI › AUDI A4 (B5/8D) 1.8L 16V TURBO 110kW/148HP PSOP M5.9.2

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 2 firmware versions

Vehicle data

BrandAUDI
ModelA4 (B5/8D)
Engine1.8L 16V TURBO 110kW/148HP PSOP M5.9.2
Stock power150 CV / 11 kW
Displacement1800 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelM5.9.2
Memory / EPROM29F200 PSOP44 2Mbit - Flash 128K x 16 (256K x 8)

Available tuning operations / options:

  • Advance at part load
  • Advance correction
  • Boost pressure
  • Injection at part load
  • Speed / RPM limiter
  • Pressure control F (RPM)
  • Boost at full throttle
  • Air mass flow
  • Overboost timing

Firmware identifiers (2)

Hardware No.Software No. (chip)VersionUpdate softwareECU
0261204178/1791037357456 1.33.007 BOSCH M5.9.2
02612063151037352104 1.33.004 BOSCH M5.9.2

ECU notes

Original EPROM PSOP 44 pins 29F200. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. Cksum in 16 bit is 01B8. P2 map is Pierbourgh valvle control. L1 map is RPM\Speed limiter, increase all the data about 10 numbers.
Original EPROM PSOP 44 pins 29F200. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY.