AUDI A3 (8L) 1.8L 20V 92KW/123HP PSOP Motronic

ECU BOSCH MOTRONIC 3.83 · 125 CV (92 kW) · 1800 cc · Benzina aspirato

ECU DatabaseAUDI › AUDI A3 (8L) 1.8L 20V 92KW/123HP PSOP Motronic

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 5 firmware versions

Vehicle data

BrandAUDI
ModelA3 (8L)
Engine1.8L 20V 92KW/123HP PSOP Motronic
Stock power125 CV / 92 kW
Displacement1800 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelMOTRONIC 3.83
Memory / EPROM28F200 PSOP44 2Mbit - Flash 128K x16 (256K x 8)

Available tuning operations / options:

  • Advance at idle speed
  • Advance at part load
  • Injection at idle speed
  • Injection at part load
  • Injection at full throttle
  • Speed / RPM limiter
  • Air mass flow

Firmware identifiers (5)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612060781037359101 1.33.008 BOSCH MOTRONIC 3.83
02612045901037352139 1.33.003 BOSCH MOTRONIC M3.8.3 DAMOS 37R
02612046751037358125 1.33.004 BOSCH MOTRONIC M3.8.3 DAMOS 37R
02612049931037350728 1.33.010 BOSCH MOTRONIC M3.8.3 DAMOS 37R
02612061271037356641 1.33.010 BOSCH MOTRONIC M3.8.3 DAMOS 37R

Vehicle technical notes

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU notes

Original EPROM PSOP 44 pins 29F200. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY.
Original EPROM PSOP 44 pins 29F200. On this epron can be set a KEY. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21.