ALFA ROMEO GT 2.0L 16V JTS 121kW/163HP MED7.1.1

ECU BOSCH MED7.1.1 · 165 CV (121 kW) · 2000 cc · Benzina aspirato

ECU DatabaseALFA ROMEO › ALFA ROMEO GT 2.0L 16V JTS 121kW/163HP MED7.1.1

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 3 firmware versions

Vehicle data

BrandALFA ROMEO
ModelGT
Engine2.0L 16V JTS 121kW/163HP MED7.1.1
Stock power165 CV / 121 kW
Displacement2000 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelMED7.1.1
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Air mass flow

Firmware identifiers (3)

Hardware No.Software No. (chip)VersionUpdate softwareECU
0261S010171037367985 1.00.006 BOSCH MED7.1.1
0261S010321037369653 1.00.009 BOSCH MED7.1.1
0261S010331037369643 1.00.002 BOSCH MED7.1.1

Vehicle technical notes

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!
Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! To work on this ECU you can use NewTrasdata

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop