MERCEDES TRUCK BUS TRAVEGO 12L 6L 315kW/422HP TEMIC

Steuergerät TEMIC TEMIC PLD · 428 CV (315 kW) · 12000 cc · Diesel sovralimentato

Steuergeräte-DatenbankMERCEDES TRUCK › MERCEDES TRUCK BUS TRAVEGO 12L 6L 315kW/422HP TEMIC

Hier finden Sie die Firmware-Kennungen (Hardware-, Software- und Update-Nummern), verfügbare Tuning-Optionen und wie Sie die Original- oder optimierte Datei erhalten.

✓ Tuning per Datei (Flash) 9 Firmware-Versionen

Fahrzeugdaten

MarkeMERCEDES TRUCK
ModellBUS
MotorTRAVEGO 12L 6L 315kW/422HP TEMIC
Serienleistung428 CV / 315 kW
Hubraum12000 cc
KraftstoffDiesel sovralimentato
FahrzeugtypTir

Steuergerät

HerstellerTEMIC
ModellTEMIC PLD
Speicher / EPROM29F200 PSOP44 2Mbit - Flash 128K x 16 (256K x 8)

Verfügbare Tuning-Optionen:

  • Max. Schwellenwert Luftmassenstrom durch den Kompressor
  • Ladedruckbegrenzer
  • Motor Überhitzungsschutz Kennfeld
  • Motor Überhitzungsschutz Kennfeld 2
  • Basis Moment beim Anlassen des Motors
  • Motorleerlaufdrehzahl für ECT-Sensor
  • Einspritzwinkel
  • Einspritzwinkel 2
  • Einspritzwinkelkorrektur
  • PLD Förderwinkel
  • Rauchbegrenzer
  • Angegebener Maximaldrehmoment
  • Maximale Drehmoment Wert

Firmware-Kennungen (9)

Hardware-Nr.Software-Nr. (Chip)VersionUpdate-SoftwareSteuergerät
G51 1.54.014 TEMIC TEMIC PLD
22B 1.00.015 TEMIC TEMIC PLD
56E 1.54.019 TEMIC TEMIC PLD
06A 1.54.012 TEMIC TEMIC PLD
09D 1.54.015 TEMIC TEMIC PLD
24B 1.54.007 TEMIC TEMIC PLD
53G 1.54.018 TEMIC TEMIC PLD
10B 1.54.013 TEMIC TEMIC PLD
11C 1.54.006 TEMIC TEMIC PLD

Steuergerät-Hinweise

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.
Original EPROM TSOP 48 pins 29F200BB. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.
Original EPROM PSOP 44 pins 29F200BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it.
This Setting File can be used for serial system NewGenius.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This setting file is enabled for the GENIUS serial tuning; it is required the specific TEMIC connection cable.Please read the specific handbook in order to open the ECU and to solder the wire inside it. On this epron can be set a KEY.