media='all' />

Holden Trax 1.7D 125hp

2013->

125 Origineel PK
155 Aangepast PK
300 Origineel NM
360 Aangepast NM
Druk op Certificate
Holden Trax

Holden Trax 2013-> 1.7D 125hp

Belangrijke Specificaties

Generatie 2013->
Kraftstoff Diesel
Motorcode A17DTS
ECU Delco E87
Compression ratio 18.2:1
Bore x Stroke 79.0 X 86.0 mm
Vermogen 125 → 155 PK +30 PK
Koppel 300 → 360 Nm +60 Nm
Vermogen
155 PK
+30 PK (+24%)
Origineel 125 PK
Stage 1 155 PK
Koppel
360 Nm
+60 Nm (+20%)
Origineel 300 Nm
Stage 1 360 Nm

Vermogensgrafiek

Origineel vermogen 125PK
Origineel Koppel 300Nm
Vermogen na Remap 155PK
Koppel na Remap 360Nm

Ontdek onze tuningoplossingen

Veelgestelde Vragen - Holden Trax

De kosten van Stage 1 chiptuning voor Holden Trax 1.7D 125hp varieert afhankelijk van de ECU (Delco E87) en specifieke eisen. Neem contact op voor een gratis offerte op maat.

Stage 1 chiptuning voor Holden Trax duurt meestal 1-2 uur werk. De tijd kan variëren afhankelijk van het ECU-type.

Ja, onze Stage 1 tunings worden ontwikkeld met respect voor de veiligheidsmarges van de motor's safety margins. De vermogenstoename van 125 ZU 155 PK (+24%) is binnen veilige parameters.

Met Stage 1 chiptuning, Holden Trax gaat van 125 PK ZU 155 PK (+30 HP) en van 300 Nm ZU 360 Nm (+60 Nm).

Stage 1 remapping takes it from 125 PK ZU 155 PK (+30 HP, +24%) and Koppel Vanaf 300 Nm ZU 360 Nm (+60 Nm). These figures refer ZU the standard Motor, with Nee hardware modifications.

A remap changes the factory calibration, so on a Voertuig still under manufacturer warranty it may affect coverage on powertrain components. Leistungsoptimierung keeps all emission systems working; deactivating emission devices such as DPF, EGR or AdBlue is not road-legal in the EU and UK and is intended for off-road, motorsport or export use only.

With a Normaal driving style consumption usually stays the same of drops slightly: the extra Koppel bij low rpm means less throttle for the same speed. Consumption goes up only if you actually VS the additional Vermogen.

Ja. The Origineel bestand is read and stored before any modification, so the Voertuig can be returned to the factory calibration at any Zeit.

Heeft u meer vragen over Holden Trax chiptuning?

Holden
Holden Trax 1.7D 125hp
+30 PK
155 PK
WhatsApp Bellen