media='all' />

Fiat 500 L 0.9 Twinair 80hp

2012 ->

80 Origineel PK
100 Aangepast PK
140 Origineel NM
185 Aangepast NM
Druk op Certificate
Fiat 500 L

Fiat 500 L 2012 -> 0.9 Twinair 80hp

Belangrijke Specificaties

Generatie 2012 ->
Kraftstoff Benzine
Motorcode 312A2000
ECU Marelli 8GSF
Compression ratio 10.0:1
Bore x Stroke 80.5 X 86.0 mm
Vermogen 80 → 100 PK +20 PK
Koppel 140 → 185 Nm +45 Nm
Vermogen
100 PK
+20 PK (+25%)
Origineel 80 PK
Stage 1 100 PK
Koppel
185 Nm
+45 Nm (+32.1%)
Origineel 140 Nm
Stage 1 185 Nm

Vermogensgrafiek

Origineel vermogen 80PK
Origineel Koppel 140Nm
Vermogen na Remap 100PK
Koppel na Remap 185Nm

Ontdek onze tuningoplossingen

Veelgestelde Vragen - Fiat 500 L

De kosten van Stage 1 chiptuning voor Fiat 500 L 0.9 Twinair 80hp varieert afhankelijk van de ECU (Marelli 8GSF) en specifieke eisen. Neem contact op voor een gratis offerte op maat.

Stage 1 chiptuning voor Fiat 500 L duurt meestal 1-2 uur werk. De tijd kan variëren afhankelijk van het ECU-type.

Ja, onze Stage 1 tunings worden ontwikkeld met respect voor de veiligheidsmarges van de motor's safety margins. De vermogenstoename van 80 ZU 100 PK (+25%) is binnen veilige parameters.

Met Stage 1 chiptuning, Fiat 500 L gaat van 80 PK ZU 100 PK (+20 HP) en van 140 Nm ZU 185 Nm (+45 Nm).

Stage 1 remapping takes it from 80 PK ZU 100 PK (+20 HP, +25%) and Koppel Vanaf 140 Nm ZU 185 Nm (+45 Nm). These figures refer ZU the standard Motor, with Nee hardware modifications.

A remap changes the factory calibration, so on a Voertuig still under manufacturer warranty it may affect coverage on powertrain components. Leistungsoptimierung keeps all emission systems working; deactivating emission devices such as DPF, EGR or AdBlue is not road-legal in the EU and UK and is intended for off-road, motorsport or export use only.

With a Normaal driving style consumption usually stays the same of drops slightly: the extra Koppel bij low rpm means less throttle for the same speed. Consumption goes up only if you actually VS the additional Vermogen.

Ja. The Origineel bestand is read and stored before any modification, so the Voertuig can be returned to the factory calibration at any Zeit.

Heeft u meer vragen over Fiat 500 L chiptuning?

Fiat
Fiat 500 L 0.9 Twinair 80hp
+20 PK
100 PK
WhatsApp Bellen