VOLVO CONSTRUCTION EQUIPMENT WHEEL LOADERS L70E - 5.7L 113kW/152HP TRW EMS2.2 V01

ECU LUCAS PLCC 28HC256 · 154 CV (113 kW) · 5700 cc · Diesel sovralimentato

ECU-databaseVOLVO CONSTRUCTION EQUIPMENT › VOLVO CONSTRUCTION EQUIPMENT WHEEL LOADERS L70E - 5.7L 113kW/152HP TRW EMS2.2 V01

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 1 firmwareversies

Voertuiggegevens

MerkVOLVO CONSTRUCTION EQUIPMENT
ModelWHEEL LOADERS
MotorL70E - 5.7L 113kW/152HP TRW EMS2.2 V01
Standaard vermogen154 CV / 113 kW
Cilinderinhoud5700 cc
BrandstofDiesel sovralimentato
VoertuigtypeOhv

ECU

FabrikantLUCAS
ModelPLCC 28HC256
Geheugen / EPROM28HC256 PLCC32 256Kbit - EEprom 32K x 8

Beschikbare tuning-opties:

  • Injection at idle speed
  • Injection at part load
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter at idle speed
  • Smoke limiter at part load
  • Smoke limiter at full throttle

Firmware-identificatoren (1)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
60100002XXXX1072 1.55.002 LUCAS PLCC 28HC256

ECU-notities

Original EPROM 28HC256 PLCC 32 pins To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. On this epron can be set a KEY. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". This Setting File can be used for serial system NewGenius.