English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

VOLVO CONSTRUCTION EQUIPMENT WHEEL LOADERS L220E - 12L 6L 261kW/350HP PLCC 28HC256

ECU LUCAS PLCC 28HC256 · 355 CV (261 kW) · 12000 cc · Diesel sovralimentato

ECU-database › VOLVO CONSTRUCTION EQUIPMENT › VOLVO CONSTRUCTION EQUIPMENT WHEEL LOADERS L220E - 12L 6L 261kW/350HP PLCC 28HC256

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 2 firmwareversies

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand

Ben je een garage of tuner?

Voertuiggegevens

MerkVOLVO CONSTRUCTION EQUIPMENT
ModelWHEEL LOADERS
MotorL220E - 12L 6L 261kW/350HP PLCC 28HC256
Standaard vermogen355 CV / 261 kW
Cilinderinhoud12000 cc
BrandstofDiesel sovralimentato
VoertuigtypeOhv

ECU

FabrikantLUCAS
ModelPLCC 28HC256
Geheugen / EPROM28HC256 PLCC32 256Kbit - EEprom 32K x 8

Beschikbare tuning-opties:

  • Injection at idle speed
  • Injection at part load
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter at idle speed
  • Smoke limiter at part load
  • Smoke limiter at full throttle

Firmware-identificatoren (2)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
20412506XXXX7505 1.55.007— LUCAS PLCC 28HC256
20412507XXXX9142 1.55.002— LUCAS PLCC 28HC256

ECU-notities

Original EPROM 28HC256 PLCC 32 pins To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". On this epron can be set a KEY. This Setting File can be used for serial system NewGenius.
Original EPROM 28HC256 PLCC 32 pins This Setting File can be used for serial system NewGenius. WARNING !! With the eprom programmer EMP21 at first select device, then choose "DEVICE OPTIONS" and then "DISABLE SDP AFTER PROGRAM" (confirm with "OK"). With EMP20 once the eprom has been programmed, select "B" for disable data protection and confirm with "Y". To read this EPROM with the EMP20 programmer you need PD28 adapters. Attention !! The EMP21 instead needs the PD32 adapters. On this epron can be set a KEY.

Verkrijg het bestand voor dit voertuig

Koop het bestand (origineel of geremapt)Registreer op mastertuningfile.com en bestel het bestand Ben je een garage of tuner?Bied deze diensten zelf aan: activeer je TuningFile-platform

Tools om deze ECU te lezen en schrijven

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Kopen The Genius The Genius OBD + Bench € 2.500 Kopen

Andere VOLVO CONSTRUCTION EQUIPMENT

WHEEL LOADERS
L150E - 12.1L 213kW/290HP PLCC 28HC256 WHEEL LOADERS
L60E - 5.7L 103kW/138HP PLCC 28HC256 WHEEL LOADERS
L110G - 7.1L 206kW/280HP TRW EMS2.2 V01 WHEEL LOADERS
L90E - 5.7L 122kW/164HP PLCC 28HC256 WHEEL LOADERS
L180E - 12.1L 234kW/318HP TRW EMS2 WHEEL LOADERS
L70E - 5.7L 113kW/152HP PLCC 28HC256 WHEEL LOADERS
L180E - 12.1L 221kW/300HP PLCC 28HC256 ARTICULATED TRUCKS
A30D 9.4L 242kW/324HP TRW EMS2 CRAWLER EXCAVATORS
EC210 BLC 5.7L 123kW/165HP PLCC 28HC256 WHEEL LOADERS
L70F - 5.7L 123kW/165HP TRW EMS2

→ Alle ECU's VOLVO CONSTRUCTION EQUIPMENT