VOLVO CONSTRUCTION EQUIPMENT CRAWLER EXCAVATORS EC300 7.8L 170kW/228HP TRW EMS2.2 V01

ECU TRW VOLVO EMS2.2 V01 · 231 CV (17 kW) · 7800 cc · Diesel sovralimentato

ECU-databaseVOLVO CONSTRUCTION EQUIPMENT › VOLVO CONSTRUCTION EQUIPMENT CRAWLER EXCAVATORS EC300 7.8L 170kW/228HP TRW EMS2.2 V01

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 8 firmwareversies

Voertuiggegevens

MerkVOLVO CONSTRUCTION EQUIPMENT
ModelCRAWLER EXCAVATORS
MotorEC300 7.8L 170kW/228HP TRW EMS2.2 V01
Standaard vermogen231 CV / 17 kW
Cilinderinhoud7800 cc
BrandstofDiesel sovralimentato
VoertuigtypeOhv

ECU

FabrikantTRW VOLVO
ModelEMS2.2 V01
Geheugen / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5554 16384 Kbit - 0x200000

Beschikbare tuning-opties:

  • Fuel angle compensation factor
  • Fuel angle compensation factor 2
  • Fuel angle compensation factor 3
  • Fuel injection compensation factor
  • Injection period
  • Injection opening time related to inj. pressure
  • Injection 1
  • Torque limiter
  • RPM Limiter
  • Minimum torque during catalyst temp reduction
  • NOx compensation factor
  • Specific injection pressure
  • Torque limiter in recovery mode
  • Torque limit table for ECT sensor
  • Turbine temperature compensation factor
  • Turbine temperature compensation factor 2

Firmware-identificatoren (8)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
60100011P0260101177P01 1.80.00212333239P01 TRW VOLVO EMS2.2 V01
60100011P0260101177P01 1.80.00222523442P01 TRW VOLVO EMS2.2 V01
60100011P0260101121P01 1.80.01212333111p01 TRW VOLVO EMS2.2 V01
60100011P0260101177P01 1.80.01012333238P01 TRW VOLVO EMS2.2 V01
60100011P0360101176P01 1.80.00712333235P01 TRW VOLVO EMS2.2 V01
60100011P0360101177P01 1.80.01012333239P01 TRW VOLVO EMS2.2 V01
60100011P0360101177P01 1.80.00912333238P01 TRW VOLVO EMS2.2 V01
60100011P0460101177P01 1.80.00912333239P01 TRW VOLVO EMS2.2 V01

ECU-notities

Microprocessor FMPC 5554 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata