TOYOTA YARIS (XP130/XP150) 1.2L L4 16V VVT-iE 68kW/91HP DENSO

ECU DENSO 211941-45800932 · 92 CV (68 kW) · 1200 cc · Benzina aspirato

ECU-databaseTOYOTA › TOYOTA YARIS (XP130/XP150) 1.2L L4 16V VVT-iE 68kW/91HP DENSO

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 3 firmwareversies

Voertuiggegevens

MerkTOYOTA
ModelYARIS (XP130/XP150)
Motor1.2L L4 16V VVT-iE 68kW/91HP DENSO
Standaard vermogen92 CV / 68 kW
Cilinderinhoud1200 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantDENSO
Model211941-45800932
Geheugen / EPROMMICRO NEC 76F0085 - 8192 Kbit - 100000

Beschikbare tuning-opties:

  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Spark advance correction - valve timing position 1
  • Spark advance correction - valve timing position 2
  • Electronic throttle control
  • Electronic throttle control 2
  • Electronic throttle control 3
  • Lambda correction f(ECT)
  • Lambda correction f(ECT) 2
  • Lambda correction f(ECT) 3
  • Torque limiter
  • Lambda enrichment - open loop
  • Lambda driver wish
  • Speed limiter
  • Driver torque request
  • Exhaust gas temperature sensor
  • Exhaust gas temperature sensor 2
  • Variable valve timing - inlet

Firmware-identificatoren (3)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
89663-0DG91- 1.67.00330DG9100 DENSO 211941-45800932
89663-0DG01- 1.67.01630DG0100 DENSO 211941-45800932
89663-0DE61- 1.67.01030DE6100 DENSO 275036-5280

ECU-notities

Microprocessor NEC 76F0085 To work on this ECU you can use NewTrasdata
Microprocessor NEC 76F0085 This Setting File can be used for serial system NewGenius. This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata