TOYOTA COROLLA (E140/E150) 1.4L 16V VVT-I 71kW/95HP ME7.9

ECU BOSCH ME7.9 · 97 CV (71 kW) · 1400 cc · Benzina aspirato

ECU-databaseTOYOTA › TOYOTA COROLLA (E140/E150) 1.4L 16V VVT-I 71kW/95HP ME7.9

Vind de firmware-identificatoren (hardware-, software- en updatenummers), beschikbare tuning-opties en hoe je het originele of geremapte bestand krijgt.

✓ Tuning via bestand (flash) 4 firmwareversies

Voertuiggegevens

MerkTOYOTA
ModelCOROLLA (E140/E150)
Motor1.4L 16V VVT-I 71kW/95HP ME7.9
Standaard vermogen97 CV / 71 kW
Cilinderinhoud1400 cc
BrandstofBenzina aspirato
VoertuigtypeAuto

ECU

FabrikantBOSCH
ModelME7.9
Geheugen / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Beschikbare tuning-opties:

  • Advance at part load
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Air mass flow

Firmware-identificatoren (4)

Hardware-nr.Software-nr. (chip)VersieUpdate-softwareECU
02612074111037351909 1.14.010 BOSCH ME7.9
02612074111037363961 1.14.005 BOSCH ME7.9
02612074111037366702 1.14.000 BOSCH ME7.9
02612085181037374635 1.14.001 BOSCH ME7.9

Technische voertuignotities

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU-notities

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!